SIDACtor
®
Protection Thyristors
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/17
Broadband Optimized
TM
Protection
Description
The MC Series TO-92 are low capacitance SIDACtor
®
thyristors designed to protect broadband CPE equipment
such as VoIP and DSL Modems from damaging
overvoltage transients.
The series provides a through-hole solution that enables
CPE equipment to comply with global regulatory
standards while limiting the impact to broadband signals.
Electrical Characteristics
Applicable Global Standards
Features and Benefits
MC Series - TO-92
Agency Approvals
Agency Agency File Number
E133083
Schematic Symbol
Pinout Designation
Part Number Marking
V
DRM
@l
DRM
=5µA
V
S
@100V/µs
I
H
I
S
I
T
V
T
@I
T
=2.2 Amps
Capacitance
@1MHz, 2V bias
V min V max mA min mA max A max V max pF min pF max
P0080ECMCLxxx P0080ECMC 6 25 50 800 2.2 4 35 75
P0300ECMCLxxx P0300ECMC 25 40 50 800 2.2 4 25 45
P0640ECMCLxxx P0640ECMC 58 77 150 800 2.2 4 55 85
P0720ECMCLxxx P0720ECMC 65 88 150 800 2.2 4 50 75
P0900ECMCLxxx P0900ECMC 75 98 150 800 2.2 4 45 70
P1100ECMCLxxx P1100ECMC 90 130 150 800 2.2 4 45 70
P1300ECMCLxxx P1300ECMC 120 160 150 800 2.2 4 40 60
P1500ECMCLxxx P1500ECMC 140 180 150 800 2.2 4 35 55
P1800ECMCLxxx P1800ECMC 170 220 150 800 2.2 4 35 50
P2300ECMCLxxx P2300ECMC 190 260 150 800 2.2 4 30 50
P2600ECMCLxxx P2600ECMC 220 300 150 800 2.2 4 30 45
P3100ECMCLxxx P3100ECMC 275 350 150 800 2.2 4 30 45
P3500ECMCLxxx P3500ECMC 320 400 150 800 2.2 4 25 40
• TIA-968-A
• TIA-968-B
• ITU K.20/21/45 Enhanced
Level
• ITU K.20/21/45 Basic
Level
• GR 1089 Inter-building
• GR 1089 Intra-building
• IEC 61000-4-5 2nd
edition
• YD/T 1082
• YD/T 993
• YD/T 950
Pin 1 Pin 3
• Low voltage overshoot
• Low on-state voltage
• Does not degrade
surge capability after
multiple surge events
within limit
• Fails short circuit when
surged in excess of
ratings
• RoHS Compliant
• 40% lower capacitance
than our Baseband
Protectors, for
applications that
demand greater signal
integrity
• Pb-free E3 means 2nd
level interconnect is Pb-
free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
609A.01)
Notes:
- Absolute maximum ratings measured at T
A
= 25ºC (unless otherwise noted).
- Components are bi-directional.
- XXX Part Number Suffix: ‘AP’ (Ammo Pack), or ‘RP1’ or ‘RP2’ (Reel Pack),.
RoHS
e3