80C00 Optical Modules for DSA8300 Sampling

Oscilloscope Datasheet

The Tektronix 80C00 optical sampling modules, when installed in DSA8300

Digital Serial Analyzer sampling oscilloscopes

, provide complete optical

test solutions for telecom (125 Mb/s to 44.50 Gb/s) and datacom (gigabit

Ethernet, 10 GbE, 40 GbE, 50G/100G/200G/400G Ethernet, Fibre Channel,

and InfiniBand) applications, as well as general-purpose optical component

testing. Other module features include an optical-to-electrical converter,

average power monitor, one or more reference receiver filters, a full

bandwidth optical path, optional integrated clock recovery

, optional

electrical clock recovery signal pickoff

, and a universal optical input

connector.

Notice to EU customers

The 80C17, 80C18, 80C20, and 80C21 modules comply with the RoHS

2 Directive 2011/65/EU and will be shipped to the EU. These two modules

are qualified for CE Marking.

All other 80C00 modules are not updated to comply with the

RoHS 2 Directive 2011/65/EU and will not be shipped to the EU.

Customers may be able to purchase products from inventory that were

placed on the EU market prior to July 22, 2017 until supplies are depleted.

Tektronix is committed to helping you with your solution needs. Please

contact your local sales representative for further assistance or to

determine if alternative product(s) are available. Tektronix will continue

service to the end of worldwide support life.

Key performance specifications

Optical bandwidths up to >80 GHz

Single and multi-mode, short and long wavelength optical signal

support

Optical mask test solutions with sensitivities to -22 dBm

Optical reference receivers (ORR)

support specified requirements for

standards-mandated compliance testing

Also compatible with DSA8200, TDS/CSA8200, TDS/CSA8000B, and TDS/CSA8000 sampling oscilloscopes.

80C07B, 80C08D, and 80C11B modules.

80C10C (with opt. CRTP), 80C12B, 80C14, 80C15, 80C17, and 80C18 modules.

The Optical Reference Receiver (ORR) is a 4th-order Bessel-Thomson filter, with a frequency response and tolerances as defined by the standards. Tektronix optimizes the response for best nominal fit and

highest quality mask test results.

www.tek.com 1

Key features

PAM4 for 400G/200G/100G/50G applications and NRZ/PAM2 for

100G/50G/10G and slower applications

80C10C 80 GHz optical bandwidth and low noise capability for

performance testing and signal characterization:

80C10C Option F1 provides 70 GHz full bandwidth and fully

integrated selectable reference receiver filtering, enabling

conformance testing at either 1310 nm or 1550 nm region for

25.781 Gb/s (100GBASE-ER4 and 100GBASE-LR4),

27.952 Gb/s (OTU-4), 39.813 Gb/s (OC-768/STM-256,

VSR-2000 G.693, 40G NRZ G.959.1), 41.25 Gb/s (40GBASE-

FR), 43.018 Gb/s (OTU3, VSR-2000 w/ FEC, 4x10G LAN PHY

OTU3), 44.5 Gb/s (OTU3), 53.125 GBd (PAM4 Ethernet 100G

per lane, TDECQ), and 57.8 GBd (64GFC) in a single module

80C10C Option F2 provides 55 GHz full bandwidth and fully

integrated selectable reference receiver filtering, enabling

conformance testing at either 1310 nm or 1550 nm for

27.952 Gb/s (OTU-4), 25.781 Gb/s (100GBASE-LR4 and

100GBASE-ER4)

80C10C Option F3 provides 80 GHz full bandwidth and fully

integrated selectable reference receiver filtering, enabling

conformance testing of 39.813 Gb/s (OC-768/STM-256,

VSR-2000 G.693, 40G NRZ G.959.1), 41.25 Gb/s (40GBASE-

FR), 43.018 Gb/s (OTU3, VSR-2000 w/ FEC, 4x10G LAN PHY

OTU3), 44.5 Gb/s (OTU3), 53.125 GBd (PAM4 Ethernet 100G

per lane, TDECQ), and 57.8 GBd (64GFC)

80C10C Clock Recovery for 25-44.5 Gb/s rates is supported

by the CR286A-HS or similar

(sold separately) and Option

CRTP and HSPR (electrical signal outputs to 44.5 Gb/s)

80C15 provides 32 GHz full bandwidth and fully integrated optical

reference receivers (ORR)

, enabling conformance testing of both

single and multi-mode conformance testing at 850,1310 and

1550 nm. The module includes bandwidth filters which support the

following rates: 25.781 Gb/s (100GBASE-SR4, Inifiniband EDR,

TDEC), 27.952 Gb/s (OTU-4), and 28.05 Gb/s (32G Fibre Channel)

80C15 Option CRTP provides a second, high-sensitivity

optical input to drive Clock Recovery Trigger Pickoff (CRTP)

electrical differential outputs for clock recovery functions or

error detection.

80C17 and 80C18 provide >30 GHz full bandwidth and fully

integrated optical reference receivers (ORR)

, enabling

conformance testing of both single and multi-mode conformance

testing at 850, 1310 and 1550 nm. The module includes bandwidth

filters which support the following rates: 25.781 Gb/s (100GBASE-

ER4, -LR4, -SR4, Inifiniband EDR); 26.5625 (PAM4 50G per lane),

TDECQ, TDEC (100GBASE-SR4), 27.952 Gb/s (OTU-4), and

28.05 Gb/s (32G Fibre Channel), and 53.125 GBd

PAM4/TDECQ.

80C17 and 80C18 Option CRTP provides an additional, high-

sensitivity optical input to drive Clock Recovery Trigger Pickoff

(CRTP) electrical differential outputs for clock recovery

functions or error detection up to 28.05 GBd.

80C20 and 80C21 provide up to 53 GHz of optical bandwidth and

lowest noise capability for performance. Used in conjunction with

the bandwidth enhancements feature of 80SJNB or 400G-M4

applications, the 80C20 and 80C21 provide reference receiver

filtering, enabling conformance testing at either 1310 nm or

1550 nm region for 25.781 Gb/s (100GBASE-ER4 and 100GBASE-

LR4), TDECQ, 26.56 Gb/s (OTU-4), 39.813 Gb/s (OC-768/

STM-256, VSR-2000 G.693, 40G NRZ G.959.1), 43.018 Gb/s

(OTU3, VSR-2000 w/ FEC, 4x10G LAN PHY OTU3), 44.5 Gb/s

(OTU3), and 53.125 GBd (PAM4 Ethernet 100G per lane, TDECQ)

in a single module

10 Gb/s Telecom and Datacom

Highly accurate ER calibrated (Extinction ratio) measurement

option for increased repeatability and transferability of the

measurement. ER Adjusted is also available (for any symbol rate)

80C14 - Low-noise, high optical sensitivity, broad wavelength

conformance testing for 10GbE, 40GbE (R4), 100GbE (X10) LAN,

WAN, FEC, 10G Fibre Channel, 16G Fibre Channel (14.025 Gb/s),

14G Infiniband FDR (14.06250 Gb/s)

80C08D and 80C12B (w/ Option 10G or 10GP) – low-noise, high

optical sensitivity, and broad wavelength conformance testing for

10 GbE, 40 GbE (R4), 100 GbE (X10) LAN, WAN, FEC, 10G fibre

channel, and 10 Gb/s telecom standards and FEC rates

80C11B 30 GHz optical bandwidth conformance testing and

characterization for 10 Gb/s telecom and datacom standards and

FEC rates

Clock Recovery solutions for 10 Gb/s applications

80C14 clock recovery for rates ≥8.5 Gb/s is supported by

CR175A (Sold separately)

80C08D and 80C11B Integrated Clock Recovery supports all

current 10 Gb/s standards or user-defined rates from 9.8 Gb/s

to 12.6 Gb/s (CR4)

80C12B clock recovery for 10 Gb/s rate is supported by the

80A05 module or CR125A clock recovery instrument (Sold

separately)

Contact Tektronix for details.

highest quality mask test results.

53.125G PAM4 rate requires the use of the 400G-M4 or 80SJNB software applications and option IMP. Uses DSP and patterns only.

Datasheet

2 www.tek.com