© Xsens, June 2021
Unless stated otherwise, all specifications are typical. Specifications subject to change without notice.
2000 deg/s
8 deg/h
520 Hz
0.007 º/s/√Hz
0.001 º/s/g
10 g
10 (x,y) 15(z) µg
500Hz
60 µg/√Hz
+/- 8 G
1 mG
0.2%
0.25 mG
u-blox
ZED F9
n/a
300-1250 hPa
1.2 Pa
+/- 8 Pa (~0.5m)
MTi-670G
Rugged, IP68-rated GNSS/INS
0.2 deg roll/pitch & sub-meter level position
accuracy
u-blox ZED F9 GNSS receiver
The MTi-670G is a Global Navigation Satel-
lite System/Inertial Navigation System (GNS-
S/INS) with an internal GNSS receiver that
enables robust, sub-meter level positioning and
orientation tracking. This easy-to-use, small GNS-
S/INS module is designed for easy integration and
seamless interfacing with other equipment.
The MTi-670G is supported by the MT Soft-
ware Suite, which includes MT Manager (GUI for
Windows/Linux), SDK, example codes and drivers
for many platforms.
Sensor Fusion Performance
Roll, Pitch
Yaw/Heading
Position
Velocity
0,2 deg RMS
0.8 deg RMS
<1m CEP
0.05m/s RMS
Gyroscope
Standard full range
In-run bias stability
Bandwidth (-3dB)
Noise Density
g-sensitivity (calibr.)
Accelerometer
Standard full range
In-run bias stability
Bandwidth (-3dB)
Noise Density
Magnetometer
Standard full range
Total RMS noise
Non-linearity
Resolution
GNSS Receiver
Brand
Model
RTCM input port
Barometer
Standard full range
Total RMS noise
Relative accuracy
Mechanical
IP-rating
Operating Temperature
Casing material
Mounting orientation
Dimensions
Connector
Weight
Electrical
Input voltage
Power consumption (typ)
Interfaces / IO
Interfaces
Sync Options
Protocols
Clock drift
Output Frequency
Built-in-self test
Software Suite
GUI (Windows/Linux)
SDK (Example code)
Drivers
Support
IP68
-40 to 85 ºC
Aluminum
No restriction, full 360º in all axes
56.50x40.90x36.75 mm
Main: ODU (AMC HD 12 pins)
RTCM: DNC
Antenna: SMA
98 g
4.5 to 24V
<1 W
CAN, RS232
SyncIn, SyncOut, ClockSync
Xbus, ASCII (NMEA) or CAN
10 ppm (or external)
2 kHz, 400 Hz SDI
Yes
MT Manager Firmware updater,
Magnetic Field Mapper
C++, C#, python, Matlab, Nucleo,
public source code
LabVIEW, ROS, GO
BASE by XSENS: online manuals,
community and knowledge base
56.50 mm
40.90 mm
36.75 mm
White label and OEM integration options available
3D models available on request
• Available online via Digi-Key, Mouser, Farnell and
local distributors
www.xsens.com