Microchip EtherCA
Product Selecon Guide
microchip.com
Introducon
Microchip oers several EtherCAT
®
Device Controller Products. These are also sometimes referred to as an ESC. This guide
provides information to assist customers in selecting an EtherCAT product based on the dierent features oered. The
guide contains information about key ESC features such as number of ports, the supported Process Data Interfaces (PDI),
EEPROM sizes supported, as well as electrical and mechanical specication. For additional product details please refer to
the specic product’s datasheet.
Product Selecon Table
Product Features LAN9252 LAN9253 LAN9254 LAN9255
EtherCAT Ports
Number of ports available 1,2,3, 4* 1,2,3,4* 1,2,3,4* 1,2,3,4*
Number of PHY available 2 PHY, 1 MII** 2 PHY, 1 MII** 2 PHY, 1 MII** 2 PHY, 1 MII**
Integrated MCU
Integrated Arm
®
Cortex
®
-M4F MCU N N N Y
10/100 Ethernet MAC (RMII) N N N Y
12-bit, 1 MSPS ADC N N N Y
Process Data Interface (PDI)
DIGIO (IN/OUT/Bi-Directional) 16 16 32 16
SPI and in built GPIO (IN/OUT) 16 16 16 16
SPI/SQI Y Y Y Y
SPI with MII (For 3 port- 2 inbuilt PHY and 1 MII) Y Y Y Y
HBI Multiplex Sigle phase (8/16) y y y y
HBI Multiplex dual phase (8/16) y y y y
HBI demux (8/16) N N y N
HBI index y y y y
Status LEDS
Link ACT LED Y Y Y Y
RUN LED y y y y
Error LED N Y Y Y
Link status LED Y Y Y Y
The Microchip name and logo and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies.
© 2021, Microchip Technology Incorporated. All Rights Reserved. 4/21 DS00003614B
Product Features LAN9252 LAN9253 LAN9254 LAN9255
EEPROM
EEPROM size (in bits) 1K to 4M 1K to 4M 1K to 4M 1K to 4M
EEPROM emulation N Y Y Y
Sync manager 4 8 8 8
FMMU 3 8 8 8
PDARM size 4K 8K 8K 8K
Fibre support y N N N
Auto MDIX y y y y
WoL y y y y
PHY Auto negotiation control for 3 port via
Firmware
Y y y y
PHY Auto negotiation control for 3 port via
Hardware strap
N y y y
Power management y y y y
Power Over EtherCAT (PoE) Y Y Y Y
25 MHz chain clock N y y y
SQI Cable diagnosis N Y Y
Cycle time (Non DIGIO) 125 μSec 76.9 μSec 76.9 μSec 76.9 μSec
Package 64 QFN, 64 TQFP 64 QFN 80 TQFP 128 TQFP
Temperature Rating
Commercial Version 0 to 70°C 0 to 70°C 0 to 70°C 0 to 70°C
Industrial Version –40 to +85°C –40 to +85°C –40 to +85°C –40 to +85°C
Extended Industrial Version –40 to +105°C –40 to +105°C –40 to +105°C –40 to +105°C
Operational Voltage 3.0–3.6V 3.0–3.6V 3.0–3.6V 3.0–3.6V
Note: *Expansion mode - Connect two 3 port devices back to back to achieve 4 port (One MII congures as upstream and other
congures as downstream)  **MII is the 3rd port and used in 3 port and expansion mode
Reference Documents
1. LAN9252 Datasheet
2. LAN9253 Datasheet
3. LAN9254 Datasheet
4. LAN9255 Datasheet