CA High Volume
www.vishay.com
Vishay Dale
Revision: 17-Dec-15
1
Document Number: 30114
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wirewound Resistors, Commercial Power, Axial Lead
FEATURES
• High performance for low cost
• Auto insertable
• High temperature coating for environmental
protection
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Kitchen appliances:
• Percolators, blenders, mixers, ranges, toasters, deep
fryers
Entertainment and consumer devices:
• Radios, televisions
• Computers and power supplies
Note
(1)
E24 decade values are available, although others may be available upon request.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL MODEL
POWER RATING
P
25 °C
W
RESISTANCE RANGE
(1)
Ω
TOLERANCE
± %
WEIGHT
(typical)
g
CA0001 1.0 0.1 to 1K 5, 10 0.65
CA0002 2.0 0.1 to 1K 5, 10 0.80
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CA HIGH VOLUME RESISTOR CHARACTERISTICS
Temperature Coefficient ppm/°C ± 350
Short Time Overload - 5 x rated power for 5 s
Maximum Working Voltage V (P x R)
1/2
Dielectric Withstanding Voltage V
AC
350
Operating Temperature Range °C -65 to +275
Terminal Strength (minimum) lb 10
GLIOBAL PART NUMBER INFORMATION
Global Part Numbering example: CA000150R00JE66
GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL
(See Standard Electrical
Specifications table/
Global Model column
for options)
R = Decimal
K = Thousand
R1500 = 0.15 Ω
1K000 = 1000 Ω
J = ± 5.0 %
K = ± 10.0 %
E66 = Lead (Pb)-free, tape/reel (Dash Number)
(up to 3 digits)
From 1 to 999 as
applicable
0015 R000A0 JE6C 6
CA High Volume
www.vishay.com
Vishay Dale
Revision: 17-Dec-15
2
Document Number: 30114
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS
MATERIAL SPECIFICATIONS
Element: Copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
Core: Ceramic
Coating: Special high temperature material
Terminals: Tin plated copper
End Caps: Tin plated steel
Part Marking: E24 color bands
DERATING
LL
L
LD
D
GLOBAL
MODEL
DIMENSIONS in inches [millimeters]
L
± 0.040
[1.0]
D
± 0.020
[0.5]
LD
± 0.002
[0.05]
LL
± 0.079
[2.0]
CA0001
0.354
[9]
0.138
[3.5]
0.024
[0.6]
1.024
[26]
CA0002
0.453
[11.5]
0.177
[4.5]
0.031
[0.8]
1.378
[35]
RATED POWER IN %
AMBIENT TEMPERATURE IN °C
25
0
20
40
60
80
100
120
- 55 75 275- 25 175
225
125
PERFORMANCE
TEST CONDITIONS OF TEST TEST LIMITS
Thermal Shock -55 °C to +275 °C, 5 cycles, 30 min dwell time ± (5.0 % + 0.05 Ω) ΔR
Short Time Overload 5 x rated power for 5 s ± (1.0 % + 0.05 Ω) ΔR
Dielectric Withstanding
Voltage
350 V
AC
for 1 min ± (2.0 % + 0.05 Ω) ΔR
Low Temperature Operation -65 °C, full rated working voltage for 45 min ± (3.0 % + 0.05 Ω) ΔR
Humidity 75 °C, 90 % - 100 % RH, 240 h ± (5.0 % + 0.05 Ω) ΔR
Load Life 1000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (5.0 % + 0.05 Ω) ΔR
Terminal Strength 10 pounds for 30 s; body twisted about axis, 3 x 360° rotations ± (2.0 % + 0.05 Ω) ΔR
Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body ± (1.0 % + 0.05 Ω) ΔR