Unless stated otherwise, all specifications are typical. Specifications subject to change without notice.
© Xsens, April 2021
450 deg/s
10 deg/h
415 Hz
0.01 º/s/√Hz
0.003 º/s/g
20 g
15 µg
375 Hz
60 µg/√Hz
+/- 8 G
0.5 mG
0.2%
0.25 mG
u-blox
MAX-M8
n/a
300-1100 hPa
3.6 Pa
~0.08m
MTi-G-710
Xsens’ high-performance product line
0.2 deg in roll/pitch, 0.8 deg in heading
accuracy
Complete Development Kit available
The MTi-G-710 is an (IMU) with an integrated GNSS
receiver. It features vibration-rejecting gyroscopes, and
offers high-quality position, velocity, acceleration, and
orientation, even in challenging environments.
The MTi-G-710 supports optimized temperature calibra-
tion, high-frequency position and orientation output,
and has configurable output settings for synchroniza-
tion with any third-party device.
The MTi-G-710 is supported by the MT Software Suite,
which includes MT Manager (GUI for Windows/Linux),
SDK, example codes and drivers for many platforms.
Sensor fusion performance
Roll, Pitch
Yaw/Heading
Strapdown Integration (SDI)
Velocity
0.2 deg RMS
0.8 deg RMS
1.0 m (1σSTD)
0.05 m/s (1σSTD)
Gyroscope
Standard full range
In-run bias stability
Bandwidth (-3dB)
Noise Density
g-sensitivity (calibr.)
Accelerometer
Standard full range
In-run bias stability
Bandwidth (-3dB)
Noise Density
Magnetometer
Standard full range
Total RMS noise
Non-linearity
Resolution
GNSS Receiver
Brand
Model
RTCM input port
Barometer
Standard full range
Total RMS noise
Resolution
Mechanical
IP-rating
Operating Temperature
Casing material
Mounting orientation
Dimensions
Connector
Weight
Electrical
Input voltage
Power consumption (typ)
Interfaces / IO
Interfaces
Sync Options
Protocols
Clock drift
Output Frequency
Built-in-self test
Software Suite
GUI (Windows/Linux)
SDK (Example code)
Drivers
Support
IP67
-40 to 85 ºC
Aluminum
No restriction, full 360º in all axes
57x41.90x23.60 mm
Fischer SV
58 g
3V3, 4.5V-34V
660 mW
USB, RS232, RS422, UART
SyncIn, SyncOut, ClockSync
Xbus, ASCII (NMEA)
1 ppm
up to 2kHz
Yes
MT Manager Firmware updater,
Magnetic Field Mapper
C++, C#, python, Matlab, Nucleo,
public source code
LabVIEW, ROS, GO
BASE by XSENS: online manuals,
community and knowledge base
57.00 mm
41.90 mm
23.60 mm
White label and OEM integration options available
3D models available on request
• Available online via Digi-Key, Mouser, Farnell and
local distributors
www.xsens.com