Unless stated otherwise, all specifications are typical. Specifications subject to change without notice.

2000 deg/s

8 deg/h

520 Hz

0.007 º/s/√Hz

0.001 º/s/g

10 g

10 (x,y) 15(z) µg

500 Hz

60 µg/√Hz

+/- 8 G

1 mG

0.2%

0.25 mG

External

300-1250 hPa

1.2 Pa

+/- 8 Pa (~0.5m)

MTi-670

• Small, IP51-rated GNSS/INS

• 0.2 deg roll/pitch & sub-meter level position

accuracy

• Connects to external GNSS receiver

The MTi-670 is a GNSS/INS with a small

form-factor design for deep integration into your

application. It is easy to use, enabling robust

sub-meter level positioning and orientation track-

ing. Its interface to an external GNSS receiver

means you can design your application with maxi-

mum efficiency. This GNSS/INS module is

designed for easy integration and seamless inter-

facing with other equipment.

The MTi-670 is supported by the MT Soft-

ware Suite, which includes MT Manager (GUI for

Windows/Linux), SDK, example codes and drivers

for many platforms.

Sensor Fusion Performance

Roll, Pitch

Yaw/Heading

Position

Velocity

0,2 deg RMS

0.8 deg RMS

<1m CEP

0.05m/s RMS

Gyroscope

Standard full range

In-run bias stability

Bandwidth (-3dB)

Noise Density

g-sensitivity (calibr.)

Accelerometer

Standard full range

In-run bias stability

Bandwidth (-3dB)

Noise Density

Magnetometer

Standard full range

Total RMS noise

Non-linearity

Resolution

GNSS Receiver

Brand

Model

RTCM input port

Barometer

Standard full range

Total RMS noise

Relative accuracy

Mechanical

IP-rating

Operating Temperature

Casing material

Mounting orientation

Dimensions

Connector

Weight

Electrical

Input voltage

Power consumption (typ)

Interfaces / IO

Interfaces

Sync Options

Protocols

Clock drift

Output Frequency

Built-in-self test

Software Suite

GUI (Windows/Linux)

SDK (Example code)

Drivers

Support

IP51

-40 to 85 ºC

PC-ABS

No restriction, full 360º in all axes

28x31.50x13 mm

Main: Phoenix Contact 16 pin, 1.27 mm

pitch

8.9 g

4.5 to 24V

<1 W

UART, CAN, RS232

SyncIn, SyncOut, ClockSync

Xbus, ASCII (NMEA) or CAN

10 ppm (or external)

2 kHz, 400 Hz SDI

Yes

MT Manager Firmware updater,

Magnetic Field Mapper

C++, C#, python, Matlab, Nucleo,

public source code

LabVIEW, ROS, GO

BASE by XSENS: online manuals,

community and knowledge base

28.00 mm

31.50 mm

13.00 mm

• White label and OEM integration options available

• 3D models available on request

• Available online via Digi-Key, Mouser, Farnell and

local distributors