High Reliability SP2T RF
Switch 50MHz to 6000MHz
F2934
Short-Form Datasheet
© 2020 Renesas Electronics Corporation
1
May 11, 2020
Description
The F2934 is a high reliability, low insertion loss, 50Ω SP2T
absorptive RF switch designed for a multitude of wireless and other
RF applications. The device covers a broad frequency range from
50MHz to 6000MHz. In addition to providing low insertion loss, the
F2934 delivers high linearity and high isolation performance while
providing a 50Ω termination to the unused RF input port.
The F2934 uses a single positive supply voltage of 2.75V to 5.25V
supporting three states using either 3.3V or 1.8V control logic.
Typical Applications
Base station 2G, 3G, 4G, 5G
Portable wireless
Repeaters and E911 systems
Digital pre-distortion
Point-to-point infrastructure
Public safety infrastructure
WIMAX receivers and transmitters
Military systems and JTRS radios
RFID handheld and portable readers
Test / ATE equipment
Features
High isolation: Greater than 67dB
Wide single 2.75V to 5.25V supply voltage range
3.3V and 1.8V compatible control logic
Operating temperature -40°C to +105°C
3 3 mm 16-VFQFPN package
Block Diagram
Control
Circuit
VDD ENVCTL
RFC
RF1
RF2
50Ω
50Ω
K
|Z|
F2934 Short-Form Datasheet
© 2020 Renesas Electronics Corporation
2
May 11, 2020
Ordering Information
Orderable Part Number
Description and Package
Carrier Type
Temperature
F2934NTGI
3 3 mm 16-VFQFPN
Tray
-40°C to +105°C
F2934NTGI8
3 3 mm 16-VFQFPN
Reel
-40°C to +105°C
F2934EVB
Evaluation Board
Revision History
Revision Date
Description of Change
May 11, 2020
Initial release.