page 1 / 2
Interface according to
Characteristic impedance 100±5
W
Frequency range DC to 10 GHz
Return loss ( typical)*
Âł 30 dB @ DC to1 GHz
Âł 21 dB @ 1 GHz to3 GHz
Âł 20 dB @ 3 GHz to 6 GHz
Âł 12 dB @ 6 GHz to 9 GHz
Insertion loss (typical)
ÂŁ 0,25 dB @ DC to 1 GHz
ÂŁ 0,35 dB @ 1 GHz to 3 GHz
ÂŁ 0,5 dB @ 3 GHz to 6 GHz
ÂŁ 0,85 dB @ 6 GHz to 9 GHz
Shielding Effectiveness (typical)
Âł 70 dB @ DC to 3 GHz
Âł 60 dB @ 3 GHz to 6 GHz
Âł 55 dB @ 6 GHz to 9 GHz
Insulation resistance ≥1 GΩ
Center contact resistance
ÂŁ 15 mW
Outer contact resistance
ÂŁ 7,5 mW
Test voltage 500 V rms
Working voltage 60 V max.
Mating cycles
Âł 25
Mating force max. 30 N
Unmating force max. 25 N
Retention force locked system min 120 N
Plastic Housing PPA / PA-GF 30
Outer contact Diecast
Center contact Brass / Bronze
Insulator SPS
Outer contact Sn
Center contact Au
Other parts Sn
Temperature range -40°C up to +105°C
Mechanical shock IEC 60068-2-27
Thermal change IEC 60068-2-14
Damp heat, cyclic IEC 60068-2-30
Dry heat IEC 60068-2-2 (+105°C)
RoHS compliant
Solder profile according to JEDEC 020 (260°C)
Date/Generated: 09.02.2021 / I.Fasold Revision: b
Date/Approved: 22.02.2021 CMB / Fung
Environmental influences
Standard plating
Materials
Vibration IEC 60068-02-64 Severity 1
Electrical characteristics
Mechanical characteristics
Applicable Standards
HTP GENERAL DATA SHEET
IMS CONNECTOR SYSTEMS GmbH
Obere Hauptstrasse 30
D-79843 Löffingen
Tel (+49) 7654 901-100
Fax (+49) 7654 901-199
Net: www.imscs.com
E-mail: sales@imscs.com