Reflective Optical Sensor
OPB9001 Series
© TT electronics plc
General Note
TT Electronics reserves the right to make changes in product specicaon without
noce or liability. All informaon is subject to TT Electronics’ own data and is
considered accurate at me of going to print.
TT Electronics | OPTEK Technology
1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200
www.electronics.com | sensors@electronics.com
Form # 500-1080-001 Rev - 06/2019
Rev B 10/2019 Page 1
Description:
The OPB9001 PCB module takes the versatile and programmable OPB9000 reflective sensor and enhances its capabilities by
integrating multiple features into a robust, small form factor for ease of use. The OPB9001 accepts a wide range of supply
voltages from 3.3 V to 30 V and comes with built-in voltage protection for maximum flexibility and protection. An
integrated, industry standard 4-pin Molex connector provides ease of connecon while the onboard LED indicators provide
overall status during power-on, output and calibraon.
The OPB9001 is designed for portability in a variety of position and presence detect applications, with a small form factor
(188 mm x 12 mm x 5 mm) to fit in even the smallest application spaces.
The full-featured OPB9001AC includes a robust Transient Voltage Suppressor (TVS) diode to protect against harmful voltage
spikes and is CE and UL cered for maximum reliability under any environmental condion. It is also capable of
withstanding up to 8 kV of contact discharge HBM.
Factory calibrated for a 12 mm distance and a white reecve surface the OPB9001 can be re-calibrated in a maer of
milliseconds with a single command for specic applicaon requirements. An interface cable can be purchased separately to
calibrate the OPB9001 Series using the OPB9000-KIT.
The product has been assessed to meet high safety, health, and environmental protection requirements as determined by
CE and EMC directives, providing for increased ESD and EMI immunity.
Note 1: For addional informaon on how to program OPB9000, see the datasheet: hps://www.electronics.com/TTElectronics/media/ProductFiles/Optoelectronics/Datasheets/OPB9000.pdf
Applications:
• Non-contact posion presence applicaons
• Industrial prinng and high-speed paper detecon
• Manufacturing and Factory automaon
• Automated sewing machines
• Automated banking machines
• Medical equipment
• Automac dispensing
• Material handling and asset tracking
Features:
• Wide operang supply voltage range up to 3.3 V - 30 V
• Ability to drive the output up to 30 V
• Integrated drive circuitry
• Increased ESD up to 8 kV
• EMI immunity capability to EMC Direcve 2014/30-EU
• UL & CE approved
• Detecng distance 2.5 mm to 50 mm
• Ambient light rejecon 25 klx+
• Programmable output conguraon and sensivity level
• Integrated 4-pin connector for plug and play capability
• -40 °C to +85 °C operang temperature range
• Small footprint dimensions L 18 mm X W 12 mm X H 5 mm
Addional Features:
• 6us response time
• Wide operating supply voltage range
4.5 V to 30 V (OPB9001A/AC)
4.5 V to 24 V (OPB9001B)
3.3 V to 5.5 V (OPB9001C)
• Reverse voltage protecon
• Single-command calibraon with on-chip EPROM
• Temperature-compensated LED drive
• Eliminate the need for external drive circuitry