KPSI ACCESSORY CATALOG
TE CONNECTIVITY SENSORS /// LIGHTNING PROTECTION FOR KPSI TRANSDUCERS 07/2016
INSTALLATION HARDWARE
TE Connectivity offers an extensive array of hardware to facilitate the installation of KPSI Transducers into almost any
application. Contact our Technical Support staff for assistance in selecting the hardware that may best suit your application or if
you have unique requirements that may require a custom solution.
Anti-Snag Cones are designed to fit over the
cable end of either 1.0" or 0.75" diameter
transducers to prevent the transducers from
getting hung on obstacles when pulling the
cable. The cones are constructed of PVC and
come in separate sizes for the two diameters.
PN: 42-01-66181 Anti-Snag Cone for
1.0" diameter for use with molded cable seal.
PN: 42-01-64134 Anti-Snag Cone for
1.0" diameter for use with gland cable seal
PN: 42-01-64136 Anti-Snag Cone for
0.75" diameter for use with gland cable seal
The Cable Hanger is used to suspend the
transducers in the liquid media. The hanger
slides onto the cable from the unterminated
end and is easily positioned while pushing
the ends of the hanger together. As the
hanger expands from the weight of the
transducer, it grips the cable by the sheath.
The cable hanger is 6.0 in (15.3 cm) long and
is constructed of 304 stainless steel. The
cable hanger is not recommended for
cable lengths in excess of 500 ft. (150 m)
as it does not take advantage of the
Kevlar strength members in the cable.
PN: 12-90-0931+