TESS-ANDO-DS0096 SENSOR SOLUTIONS /// MEAS THIN FILM RTD
REV A
Page 1
MEAS RTD THIN FILM
ELEMENT
Thin, Flat, Small
Two-Wire
Mechanical Robustness
High Accuracy
Low Cost
The RTD Thin Film Element are the essential piece in most of our
product lines. The element is composed of platinum deposited on a
ceramic substrate, then coated with glass. The thin film element can be
integrated in different designs of probes.
Dimensions
‘L’= Element Length
‘W’= Element Width
‘T’= Element Thickness
‘Y’= Leadwire/Cable Length
Features
Temperature Range:
» -200°C to 600°C
Platinum Element Configuration:
» 100 Ohm, 1,000 Ohm
» Accuracy at 0°C:
±.06%, ±.12%
Nickel Element Configuration:
» 120 Ohm
» Accuracy at 0°C: ±.5%
Applications
Process
Aerospace
Defense
Hot Melt
Motor/Generator
MEAS RTD THIN FILM ELEMENT
TESS-ANDO-DS0096 SENSOR SOLUTIONS /// MEAS THIN FILM RTD
REV A
Page 2
Performance Specifications
Stability:
Typical drift is less than 0.04% at 1,000 hours
at max temperature
Recommended Applied Current:
1.0 mA at 100 Ohm
0.3 mA at 1,000 Ohm
Ordering Information
Standard RTD Thin Film Element Configurations* (Model 650)
Part Number
Accuracy
'L' Length
‘W’ Width
‘T’ Thickness
‘Y’ Lead Length
Temperature Range
R-12552-2
±.06% at 0°C
2.49 mm [.098”]
1.60 mm [.063”]
1.09 mm [.043”]
10.16 mm [.40”]
-200°C to 600°C
R-12552-1
±.12% at 0°C
2.49 mm [.098”]
1.60 mm [.063”]
1.09 mm [.043”]
10.16 mm [.40”]
-200°C to 600°C
R-2823-2
±.06% at 0°C
5.00 mm [.197”]
1.52 mm [.060”]
1.29 mm [.051”]
10.16 mm [.40”]
-200°C to 600°C
R-2823
±.12% at 0°C
5.00 mm [.197”]
1.52 mm [.060”]
1.29 mm [.051”]
10.16 mm [.40”]
-200°C to 600°C
R-6158-1
±.06% at 0°C
1.60 mm [.063”]
1.20 mm [.047”]
.79 mm [.031”]
10.16 mm [.40”]
-200°C to 400°C
R-6158-2
±.12% at 0°C
1.60 mm [.063”]
1.20 mm [.047”]
.79 mm [.031”]
10.16 mm [.40”]
-200°C to 400°C
R-6158-12
±.06% at 0°C
1.60 mm [.063”]
1.20 mm [.047”]
.79 mm [.031”]
10.16 mm [.40”]
-200°C to 400°C
R-6275
±.12% at 0°C
2.30 mm [.091”]
2.00 mm [.079”]
1.09 mm [.043”]
10.00 mm [.39”]
-200°C to 600°C
R-6275-10
±.06% at 0°C
2.30 mm [.091”]
2.00 mm [.079”]
1.29 mm [.051”]
8.00 mm [.315”]
-200°C to 600°C
R-6275-5
±.12% at 0°C
1.55 mm [.061”]
1.20 mm [.047”]
.79 mm [.031”]
10.16 mm [.40”]
-200°C to 600°C
R-12026-1
±.12% at 0°C
5.08 mm [.098”]
1.60 mm [0.063”]
.91 mm [.036”]
10.16 mm [.40”]
-200°C to 600°C
R-7600-03
±.5% at 0°C
3.99 mm [.157”]
2.00 mm [0.079”]
1.09 mm [.043”]
6.98 mm [.28”]
-50°C to 250°C
RTD Temperature Accuracy Specifications:
Element Material
TCR
Standard Tolerances at 0°C
±.12%
±.5%
Platinum
0.00385
0.30°C, 0.12Ω
1.20°C, 0.46Ω
Platinum
0.00391
0.30°C, 0.12Ω
1.20°C, 0.46Ω
Nickel
0.00672
N/A
0.85°C, 0.68Ω
te.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, MEAS, TE Connectivity, TE connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred
to herein might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or
misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2016 TE Connectivity Ltd. family of companies All Rights Reserved.
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity Company
Tel: 800-522-6752
customercare.ando@te.com
EUROPE
Measurement Specialties (Europe), Ltd.,
a TE Connectivity Company
Tel: 800-440-5100
customercare.tlse@te.com
ASIA
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
Tel: 0400-820-6015
customercare.chdu@te.com