ZGM130S Z-Wave 700 SiP Module Data

Sheet

The Silicon Labs Z-Wave 700 SiP Module, ZGM130S, is a fully integrated Z-Wave

module, enabling rapid development of Z-Wave solutions.

It is an ideal solution for energy-friendly smart home control applications such as motion

sensors, door/window sensors, access control, appliance control, building automation,

energy management, lighting, and security networks in the “Internet of Things”.

Built with low-power Gecko technology, which includes innovative low energy techni-

ques, fast wake-up times and energy saving modes, the ZGM130S reduces overall pow-

er consumption and maximizes battery life.

The module contains a native security stack and a comprehensive set of hardware

peripherals usable for advanced device functionality, and offers 64 kB of flash memory

for OEM applications.

Z-Wave 700 ZGM130S modules can be used in a wide variety of applications:

KEY FEATURES

• TX power up to 14 dBm

• RX sensitivity @ 100 kbps: -103.9 dBm

• Range: up to 1 mile

• 9.8 mA RX current at 100 kbps, GFSK,

868 MHz

• 13.3 mA TX current at 0 dBm output

power at 908 MHz

• 0.8 μA EM4H current (128 Byte RAM

retention and RTCC running from LFRCO)

• 32-bit ARM® Cortex®-M4 core at 39 MHz

• Flash memory: 512 kB (64 kB Application)

• RAM: 64 kB (8 kB Application)

• Autonomous Hardware Crypto Accelerator

and Random Number Generator

• Integrated DC-DC Converter

• Robust peripheral set and up to 32 GPIO

• External SAW filter optional

• Smart Home

• Security

• Lighting

• Health and Wellness

• Metering

• Building Automation

RF frontend

Timers and Triggers

32-bit bus

Peripheral Reflex System

Serial

Interfaces

I/O Ports Analog I/F

Lowest power mode with peripheral operational:

USART

Low Energy

UART

External

Interrupts

General

Purpose I/O

Pin Reset

Pin Wakeup

ADC

VDAC

Analog

Comparator

EM3—StopEM2—Deep SleepEM1—Sleep EM4—Hibernate EM4—ShutoffEM0—Active

Energy Management

Brown-Out

Detector

DC-DC

Converter

Voltage

Regulator

Voltage

Monitor

Power-On

Reset

Other

Capacitive

Touch

Op-Amp

IDAC

CRYPTO

CRC

True Random

Number Generator

SMU

Core / Memory

ARM Cortex

M4 processor

with DSP extensions, FPU and MPU

ETM Debug Interface RAM Memory

LDMA

Controller

512 kByte Flash

Program

Memory

Real Time

Counter and

Calendar

Cryotimer

Timer/Counter

Low Energy

Timer

Pulse Counter Watchdog Timer

Protocol Timer

Low Energy

Sensor Interface

Radio Transceiver

DEMOD

AGC

IFADC

CRC

BUFC

MOD

FRC

RAC

RF Frontend

LNA

Frequency

Synthesizer

PGA

Crystal

Clock Management

L-F

RC Oscillator

H-F

RC Oscillator

Auxiliary H-F RC

Oscillator

Ultra L-F RC

Oscillator

H-F Crystal

Oscillator

Supply

DCDC and

decoupling

components

39 MHz

RF frontend

matching

silabs.com | Building a more connected world. Rev. 1.2

1. Feature List

The ZGM130S highlighted features are listed below.

• Low Power Wireless System-on-Chip.

•

High Performance 32-bit, 39 MHz ARM Cortex

-M4 with

DSP instruction and floating-point unit for efficient signal

processing

• Embedded Trace Macrocell (ETM) for advanced debugging

• 512 kB flash program memory (64 kB available for user ap-

plications)

• 64 kB RAM data memory (8kB available for user applica-

tions)

• TX power up to 14 dBm

• Supports optional external SAW filter

• Low Energy Consumption

• 9.8 mA RX current at 100 kbps, GFSK, 868 MHz

• 40.1 mA TX current at 14 dBm output power at 912 MHz

• 40.7 mA TX current at 13 dBm output power at 868 MHz

• 13.3 mA TX current at 0 dBm output power at 908 MHz

• 69 μA/MHz in Active Mode (EM0)

• 0.8 μA EM4 current (128 Byte RAM retention and RTCC

running from LFRCO)

• High Receiver Performance

• -97.9 dBm sensitivity at 100 kbit/s GFSK, 868 MHz

• -97.5 dBm sensitivity at 100 kbit/s GFSK, 915 MHz

• -103.9 dBm sensitivity at 100 kbit/s DSSS O-QPSK, 912

MHz

• Supported Protocols:

• Z-Wave

• Z-Wave Long Range

• Support for Internet Security

• General Purpose CRC

• True Random Number Generator (TRNG)

• 2 × Hardware Cryptographic Acceleration for AES 128/256,

SHA-1, SHA-2 (SHA-224 and SHA-256) and ECC

• Wide selection of MCU peripherals

• 12-bit 1 Msps SAR Analog to Digital Converter (ADC)

• 2 × Analog Comparator (ACMP)

• 2 × Digital to Analog Converter (VDAC)

• 3 × Operational Amplifier (Opamp)

• Digital to Analog Current Converter (IDAC)

• Low-Energy Sensor Interface (LESENSE)

• Multi-channel Capacitive Sense Interface (CSEN)

• 32 pins connected to analog channels (APORT) shared be-

tween analog peripherals

• 32 General Purpose I/O pins with output state retention and

asynchronous interrupts

• 8 Channel DMA Controller

• 12 Channel Peripheral Reflex System (PRS)

• 2 × 16-bit Timer/Counter

• 3 or 4 Compare/Capture/PWM channels

• 1 × 32-bit Timer/Counter

• 3 Compare/Capture/PWM channels

• 32-bit Real Time Counter and Calendar

• 16-bit Low Energy Timer for waveform generation

• 32-bit Ultra Low Energy Timer/Counter for periodic wake-up

from any Energy Mode

• 16-bit Pulse Counter with asynchronous operation

• 2 × Watchdog Timer

• 3 × Universal Synchronous/Asynchronous Receiver/Trans-

mitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I

•

Low Energy UART (LEUART

™

)

•

2 × I

C interface with SMBus support and address recogni-

tion in EM3 Stop

• Wide Operating Range

• 1.8 V to 3.8 V single power supply

• Integrated DC-DC

• -40 °C to 85 °C

• Dimensions

• 9 × 9 × 1.21 mm

ZGM130S Z-Wave 700 SiP Module Data Sheet

Feature List

silabs.com | Building a more connected world. Rev. 1.2 | 2