Report No.: E-Y1708898-1
Page 1 of 5
Rev: 00
No.22, Jinqianling Third Street, Jitigang,
Huangjiang,Dongguan, Guangdong, China
EN 62479 TEST REPORT
Equipment under Test :
ZETA MS
Trade Mark :
N/A
Model /Type :
MS01-ZS-G55S63YN
Listed Models :
N/A
Applicant
:
Zifisense CO.,Ltd
Address
:
Room 1303 Building A02, the third period Software
Park, Jimei area, XIAMEN city, China
Manufacturer
:
Zifisense CO.,Ltd
Address
:
Room 1303 Building A02, the third period Software
Park, Jimei area, XIAMEN city, China
Laboratory
:
Dongguan Yaxu (AiT) Technology Limited
Address
:
No.22, Jinqianling Third Street, Jitigang,
Huangjiang,Dongguan, Guangdong, China
Tel :
0769-82020499
Fax :
0769-82020499
The test report merely corresponds to the test sample. It is not permitted to copy
extracts of these test result without the written permission of the test laboratory.
Test Result:
PASS
Report No.: E-Y1708898-1
Page 2 of 5
Rev: 00
No.22, Jinqianling Third Street, Jitigang,
Huangjiang,Dongguan, Guangdong, China
TEST RESULT CERTIFICATION
Applicant’s name ................. :
Zifisense CO.,Ltd
Address ................................. :
Room 1303 Building A02, the third period Software Park, Jimei
area, XIAMEN city, China
Manufacture's Name ............ :
Zifisense CO.,Ltd
Address ................................. :
Room 1303 Building A02
, the third period Software Park, Jimei
area, XIAMEN city, China
Product description
Product name ........................... :
ZETA MS
Model and/or type reference :
MS01-ZS-G55S63YN
Addition Mode ........................... :
N/A
Standards ............................. :
EN 62479:2010
This device described above has been tested by AiT, and the test results show that the equipment
under test (EUT) is in compliance with the 2014/53/EU RE Directive Art.3.1(a)
requirements. And it
is applicable only to the tested sample identified in the report.
This report shall not be reproduced except in full, without the written approval of AiT
, this document
may be altered or revised by AiT, personal only, and shall be noted in the revision of the document.
Date of Test ............................................ :
Date (s) of performance of tests ............. :
Sep. 18, 2017~ Sep. 23, 2017
Date of Issue ........................................... :
Sep. 23, 2017
Test Result ............................................... :
Pass
Compiled by
( position+printed
name+signature) ......................... :
File administrators
Seal.Chen
Supervised by
( position+printed
name+signature) ......................... :
Technique principal
Seal.Chen
Approved by
( position+printed
name+signature) ......................... :
Manager
Jackie.Deng