page 1 / 2
Interface according to Long wipe SMP Interface
Characteristic impedance 50 Ω
Frequency range DC - 6 GHz
Return loss (straight contacts)
≤ 1 GHz ≥ 35 dB typ.
≤ 2 GHz ≥ 32 dB typ.
≤ 4 GHz ≥ 25 dB typ.
≤ 6 GHz ≥ 20 dB typ.
Insertion loss @ 1 GHz
≤ 0,1
dB max.
Insulation resistance 5 GΩ
Center contact resistance ≤ 6 mΩ
Outer contact resistance ≤ 2 mΩ
Test voltage 500 V rms
Working voltage ≤ 300 V max.
Power handling 100 W @ 2,2 GHz
Working current
≤ 1.2
A DC
Engagement force smooth bore 9 N max.
limited detent 45 N max.
full detent 68 N max.
Disengagement force smooth bore 2,2 N min.
limited detent 9 N min.
full detent 22 N min.
Center contact retention force 7 N min.
Mating cycles smooth bore > 1000
limited detent > 500
full detent > 100
Radial misaligment ≤ 4°
Axial misaligment
± 0,7 mm
Housing Brass
Centre contact CuBe / Brass
Spring loaded contacts CuBe
Insulator PTFE / PEEK
Ferrule Copper / Brass
Contact area Au / NiP + Au
Centre contact Au / NiP + Au
Other parts Au / NiP + Au / White Bronze
Temperature range -55°C up to +125°C
Vibration IEC 60068-2-61
Dry Heat
Humidity IEC 60068-2-78
Shock IEC 60068-2-27
Thermal Shock IEC 60068-2-14
Date: 26.10.2017 M.Nadri Revision: 1
Approved: 27.10.2017 P.Schuh
Applicable Standards
IEC 60068-2-2
Environmental influences
Standard plating
Materials
Electrical characteristics
Mechanical characteristics
Long wipe SMP (SMPL) GENERAL DATASHEET
IMS CONNECTOR SYSTEMS GmbH
Obere Hauptstrasse 30
D-79843 Löffingen
Tel (+49) 7654 901-100
Fax (+49) 7654 901-199
Net: www.imscs.com
E-mail: sales@imscs.com
Long wipe SMP (SMPL) GENERAL DATASHEET
min. max. min. max.
A 0,67 0,71 1)
B 3,53 3,69
C 3,13 3,23 3,43
D 0 0,2
E
F 2,1 2,3
G 0,84 0,94
H 1,39 1,45
I 2,74 2,84
K 3 3,1
L 1,14 1,4
1) resilient. Dim. To meet electrical and mechanical requirements
Gefedertes Maß um elektrische und mechanische Eigenschaften zu gewährleisten.
Date: 26.10.2017 M.Nadri Revision: 1
Approved: 27.10.2017 P.Schuh
Interface dimensions
Plug / Stecker
Jack / Buchse
(mm)
(mm)
page 2 / 2
IMS Connector Systems connectors fulfills in principle the indicated technical data.Individual values of the connectors my
deviate depending based on applications, design, type of cables, assembly method and execution. Specific product data sheets
for paticular products can be provided on request from your IMS Connector Systems sales contact.
IMS CONNECTOR SYSTEMS GmbH
Obere Hauptstrasse 30
D-79843 Löffingen
Tel (+49) 7654 901-100
Fax (+49) 7654 901-199
Net: www.imscs.com
E-mail: sales@imscs.com
Jack/Buchse
Plug/Stecker-Smooth bore (Catchers mit)
Plug/Stecker-Limited detent