FAQs 10464
Effective January 2018
Supersedes October 2015
BUSSMANN
SERIES
Bussmann series product date code explanation
Date codes are applied to Bussmann™ series products to indicate when they were made.
The date code is comprised of:
•
A letter prefix representing the year, followed by
•
A two (2) digit suffix representing the week of the year
For example:
K40 = 40
th
week of 2003
N02 = 2
nd
week of 2006
Below are the letter codes used from 2000 to 2018.
B = 2018 A = 2017 Z = 2016 Y = 2015
X = 2014 W = 2013 V = 2012 U = 2011
T – 2010 S – 2009 R – 2008 P – 2007
N - 2006 M - 2005 L – 2004 K – 2003
J – 2002 H – 2001 G - 2000
If you have any questions about this information or about overcurrent protection in general, please
contact us toll-free Monday Friday, 7:00 a.m. — 5:00 p.m. Central time at 1-855-287-7626, or email:
FuseTech@eaton.com.
Bussmann series product date code explanationFAQs 10464
Effective January 2018
Eaton and Bussmann are valuable trademarks
of Eaton in the U.S. and other countries. You
are not permitted to use the Eaton trademarks
without prior written consent of Eaton.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
Eaton.com
Bussmann Division
114 Old State Road
Ellisville, MO 63021
United States
Eaton.com/bussmannseries
© 2015 Eaton
All Rights Reserved
Printed in USA
Publication No. 10464
October 2015
Follow us on social media to get the
latest product and support information.
For Eaton’s Bussmann series
product information,
call 1-855-287-7626 or visit:
Eaton.com/bussmannseries
The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are
by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the
end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit
distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once
a product has been selected, it should be tested by the user in all possible applications.