Plugs and sockets for industrial use

The Company

I.L.M.E. SpA - INDUSTRIA LOMBARDA MATERIALE ELETTRICO - has been

operating in Milan since 1938, in particular in the electrotechnical sector for the

manufacturing of equipment for industrial installations.

ILME reects the traditional entrepreneurial spirit of Lombardy, and has enjoyed

continuous expansion for over half a century.

The company has carved an important role for itself in the main world markets, also

operating directly in the countries that have assumed world leadership in the eld

of automation, including Germany and Japan.

In the electrical connection sector with applications in industrial automation,

characterised by top performance and utmost reliability needs, ILME is today the

acknowledged partner of many leading companies worldwide.

The company’s fundamental values are: product innovation, original solutions,

excellent price-quality ratio, a customer-oriented sense of service, ethical behaviour

and an environmentally-friendly approach.

To promote the continuing improvement of its qualitative results, ILME has always

encouraged its collaborators to work with utmost responsibility and participation.

The company focuses on a series of benets to the user, including research into

the most suitable materials, high quality and safe cabling, a rapid turnaround and

readily available services.

CE marking

As from 1

January 1997, in order to launch electrical products on the European

market the manufacturer must ensure these bear the relevant CE marking, in line

with the Low Voltage Directive 73/23/ EEC* (implemented in Italy as L.D. 18-10-

1977 no. 791) and its modication 93/68/EEC* (implemented in Italy as L.D. 25-

11-1996 no. 626/96, published in the supplement to the Gazzetta Ufciale of 14-

12-1996). The CE marking must be visible on the product or, if this is not possible,

on the packaging, the instructions for use or on the warranty certicate. It acts as

a declaration by the manufacturer that the product complies with all relevant EU

directives regarding its eld of application.

ILME products bear the CE marking on the actual product or its packaging.

Almost all ILME products fall within the scope of the Low Voltage Directive.A

declaration of conformity is required in order to be able to apply the CE marking.

This declaration, to which the market is not directly entitled, must be made

available to the controlling authorities (in Italy, the Ministry for Industry, Commerce

and Handicraft) at all times. In it, the manufacturer declares the technical safety

standard(s) followed in the manufacture of the product. These standards must be,

in decreasing order of preference:

- a European standard (EN prex)

- a European harmonisation document (HD prex)

- an international IEC standard

- a national standard

- in the absence of reference standards, the manufacturer’s

internal specications guaranteeing compliance with the

basic safety requirements of the directive.

Compliance with harmonised technical standards (i.e. ratied

by CENELEC) also constitutes presumption of compliance

with the basic safety requirements of the directives.

The CE marking of ILME products results from the declaration

of conformity of the product to harmonised standards or

international IEC standards.

Through the CE marking, ILME declares full compliance, not

merely with the directive’s basic safety requirements, but also

with those international or national EU standards on which

voluntary safety certication markings are based (e.g. IMQ

and VDE). In this way, ILME intends to give the CE marking

the value of self-certication in terms of safety, given the loss

in legal value of voluntary certications issued by third parties,

ratied by directive 93/68/EEC*.

Notwithstanding the above, practically all ILME products still

bear voluntary conformity markings.

The above mentioned EU declaration of conformity becomes null and void

when the assembly of products includes one or more components not

manufactured by ILME and without CE marking.

*Note: The next legal reference for the Low Voltage Directive was 2006/95/EC, as

consolidation of the original Directive 73/23/EEC + Directive 93/68/EEC.

On 29

March 2014, the Ofcial Journal of the European Union published the

new Low Voltage directive 2014/35/EU dd. 26

February 2014, a recast version of

directive 2006/95/EC, which is in force since on 20

April 2016.

The information contained in this catalogue is not binding and may be changed

without notice.

ISO 9001 certication: 2015

Design, manufacture and distribution

of industrial electrical equipment (IAF 19)

Certicate No. 50 100 11133

For IMQ marking, please refer to Programme Survey 2016 (XLG PE 216)

- IP66/IP67 degree of protection

- mechanical resistance: IK10

- insulating enclosure, robust construction

- 16A, 32A, 63A, 125A models

- installation: wall / ush mount

- cable entry: top, bottom or rear

- bottom plug entry

- versions: without fuses; with fuses; with room

for modular unit; with 24V transformer

TM Series 3 - 9

- IP66 degree of protection

- mechanical resistance: IK10

- insulating enclosure

- 16A, 32A, 63A models

- installation: single wall mount; with FC series

- cable entry: top

- bottom plug entry

- versions: without fuses; with fuses;

with transformer

IB6 Series and FC Complements 10 - 12

- IP44 and IP66/IP67 degree of protection

- mechanical resistance: IK10

- insulating enclosure, robust construction

- 16A, 32A

- installation: wall / ush mount

- cable entry: top, bottom or rear

- plug entry 15° angled

- standard PLUSO sockets

TM PI Series 7

- IP55 degree of protection

- mechanical resistance: IK10

- die-cast aluminium alloy enclosure

- 16A, 32A, 63A,125A models

- installation: wall mount

- cable entry: top or rear

- bottom plug entry

- versions: without fuses; with fuses;

with 24V transformer

PB5 Series - Die-cast aluminium alloy 13

- IP44/IP55 degree of protection

- mechanical resistance: 6 J

- insulating enclosure

- 16A, 32A models

- installation: wall / ush mount

- cable entry: top or rear

- plug entry 15° angled

- versions: without fuses; with fuses;

with 24V transformer

SQV/FM Series 14 - 15

- IP66/IP67 degree of protection

- mechanical resistance: IK10

- UL 94V-0 insulating enclosure

- 16A, 32A, 63A models

- installation: wall / ush mount

- cable entry: top, bottom or rear

- plug entry: front

- versions: without fuses; with fuses;

with 24V transformer

BK Series 16

QC/QM Series 18 - 19

- IP65 and IP55 degree of protection

- mechanical resistance: IK08

- insulating enclosure, robust construction

- 16A, 32A, 63A, Schuko

model

- can be joined and stacked

- assembled version supplied with: power supply

plug, sockets outlets, safety device

- IP66/IP67 degree of protection

- mechanical resistance: IK10

- insulating enclosure, robust construction

- 16A, 32A, 63A models

- installation: wall mount

- cable entry: top or rear

- bottom plug entry

- versions: without fuses; with fuses

TM Ex Series 8

Content - Plugs and sockets for industrial use