Surface Mount Multilayer Varistor
Revision On July 31, 2018
1 / 5
@SOCAY Electronics Co., Ltd. 2018
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
SV0603N5R5G0B
SOCAY Electronics Co., Ltd. www.socay.com
The SV0603N5R5G0B is based on Multilayer fabrication
technology. These components are designed to suppress a
variety of transient events, including those specified in IEC
61000-4-2 or other standards used for Electromagnetic
Compliance (EMC). The SV0603N5R5G0B is typically applied
to protect integrated circuits and other components at the
circuit board level. It can operate over a wider temperature
range than zener diodes.
SMD type zinc oxide based ceramic chip
Lead free plating termination provided good solderability
characteristic
Insulator overcoat keeps excellent low and stable
leakage current
Quick response time (<1ns)
Low clamping voltage
High transient current capability
Meet IEC 61000-4-2 standard
Compact size for EIA 0603
Application for Mother Board, Notebook, Cellular Phone,
PDA, handheld device, DSC, DV, Scanner, and Set- Top
Box…etc.
Suitable for Push-Button, Power Line and Low
Frequency single line over-voltage protect.
Applications
Equivalent Circuits
Description
Features
Surface Mount Multilayer Varistor
Revision On July 31, 2018
2 / 5
@SOCAY Electronics Co., Ltd. 2018
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
SV0603N5R5G0B
SOCAY Electronics Co., Ltd. www.socay.com
V
RMS
- Maximum AC operating voltage the varistor can maintain and not exceed 10μA leakage current
V
DC
- Maximum DC operating voltage the varistor can maintain and not exceed 10μA leakage current
V
V
- Voltage across the device measure at 1mA DC current.
Equivalent to V
B
“breakdown voltage”
V
C
- Maximum peak current across the varistor with 8/20μs waveform and 1A pulse current.
C
P
- Device capacitance measured with zero volt bias 1Vrms at 1MHz.
I
max
- Maximum peak current which may be applied with 8/20μs waveform without device failure.
W
max
- Maximum energy which may be dissipated with the 10/1000μs waveform without device failure.
Symbol
Minimum
Maximum
Units
V
RMS
—
4
V
V
DC
—
5.5
V
V
V
8.0
18
V
V
C
—
24
V
C
P
—
—
pF
I
max
—
30
A
W
max
—
0.1
W
Electrical Characteristics (25±5ºC)