ALUMINUM ELECTROLYTIC CAPACITOR
22
ALUMINUM ELECTROLYTIC CAPACITOR
23
GDT 125°C Standard Series
• For surface mounted and high reliability application.
• Operating temperature range up to 125°C.
• Life guaranteed 2,000 hours/125°C.
●
Specications
●
Dimension (mm)
Item Performance Characteristics
Operating Temperature range -40 + 125°c
Rated Voltage 10V ∼ 50V
Capacitance Range 10 ∼ 330 µF
Capacitance Tolerance
±20% (120 Hz, 20°C)
Leakage Current
I ≤ 0.01CV or 3µA, whichever is greater after 2 minutes application of rated voltage.
Dissipation Factor
(120 Hz, 20°C)
Rated voltage (V) 10 16 25 35 50
Tan δ (max.) 0.32 0.24 0.21 0.18 0.18
Temperature
Characteristics
(120 Hz)
Impedance Ratio / Stability at Low Temperature
Rated voltage (V) 10 16 25 35 50
Z (-25°C) / Z (20°C) 4 3 2 2 2
Z (-40°C) / Z (20°C) 12 8 6 4 4
Load Life
After 2,000 hours application of WV at 125°C, capacitor shall meet the characteristics mentioned below.
Capacitance change Within ±30% of initial value
Tan δ 300% or less of initial specied value
Leakage current Initial specied value or less
Shelf Life At 125°C, no voltage applied for 1,000 hours, the capacitor shall meet the limits as in load life. (With voltage treatment)
Resistance to
Soldering Heat
Capacitor placed on a 250°C hot plate for 30 seconds with their electrode terminals facing downward will fulll the
following conditions after being cooled to room temperature.
Capacitance change Within ±10% of initial value
Tan δ
≤ initial specied value
Leakage current
≤ initial specied value
●
Standard Products Table
Df L A H I W P K
8 10.2 8.3 10.0 3.4 0.90 3.1 0.70
10 10.2 10.3 12.0 3.5 0.90 4.6 0.70
WV(SV)
Cap µF)
10
(13)
16
(20)
25
(32)
35
(44)
50
(63)
10 8 x 10.2 34
22 8 x 10.2 50
33 8 x 10.2 60
47 8 x 10.2 75 10 x 10.2 85
100 8 x 10.2 70 8 x 10.2 75 10 x 10.2 120
220 8 x 10.2 90 10 x 10.2 120 10 x 10.2 120
330 10 x 10.2 120
Ripple current (mA) at 125°C 120 Hz
Df x L (mm)