ARK Microelectronics Co., Ltd. www.ark-micro.com Rev. 2.0 Sep. 2019
1 / 6
DMX1015E
Ultrahigh Threshold Voltage Depletion-Mode Power MOSFET
General Features
➢ ESD improved Capability
➢ Depletion Mode (Normally On)
➢ Proprietary Advanced Planar Technology
➢ Proprietary Advanced Ultrahigh Vth Technology
➢ RoHS Compliant
➢ Halogen-free available
Applications
➢ Quick Charger
➢ Current Source
➢ Voltage Source
General Description
This novel depletion mode MOSFET, developed and manufactured by ARK proprietary ultrahigh threshold
voltage technology. By using the sub threshold characteristics, the depletion mode MOSFET can provide stably
power to the load, and the voltage can be clamped to protect the load without Zener diode, and the circuit
consumption is reduced.
Ordering Information
Part Number
Package
Marking
Remark
DMX1015E
SOT-89
1015
Halogen Free
Absolute Maximum Ratings T
A
=25℃ unless otherwise specified
Symbol
Parameter
DMX1015E
Unit
V
DSX
Drain-to-Source Voltage
[1]
100
V
V
DGX
Drain-to-Gate Voltage
[1]
100
V
I
D
Continuous Drain Current
0.1
A
I
DM
Pulsed Drain Current
[2]
0.4
P
D
Power Dissipation
1.00
W
V
GS
Gate-to-Source Voltage
±30
V
V
ESD(G-S)
Gate Source ESD
IEC, C=150pF, R=330Ω
500
V
T
L
Soldering Temperature
Distance of 1.6mm from case for 10 seconds
300
℃
T
J
and T
STG
Operating and Storage Temperature Range
-55 to 150
Caution: Stresses greater than those listed in the“Absolute Maximum Ratings” may cause permanent damage to the device.
Thermal Characteristics
Symbol
Parameter
DMX1015E
Unit
R
θJA
Thermal Resistance, Junction-to-Ambient
125
K/W
D
S
G
D
G
S
SOT-89
ARK Microelectronics Co., Ltd. www.ark-micro.com Rev. 2.0 Sep. 2019
2 / 6
DMX1015E
Electrical Characteristics
OFF Characteristics T
A
=25℃ unless otherwise specified
Symbol
Parameter
Min.
Typ.
Max.
Unit
Test Conditions
BV
DSX
Drain-to-Source Breakdown Voltage
100
--
--
V
V
GS
=-30V, I
D
= 1mA
I
GSS
Gate-to-Source Leakage Current
--
--
20
uA
V
GS
=+30V, V
DS
=0V
--
--
20
V
GS
=-30V, V
DS
=0V
ON Characteristics T
A
=25℃ unless otherwise specified
Symbol
Parameter
Min.
Typ.
Max.
Unit
Test Conditions
I
DSS
Saturated Drain-to-Source Current
100
--
--
mA
V
GS
=0V, V
DS
=25V
R
DS(ON)
Static Drain-to-Source On-Resistance
--
--
30
Ω
V
GS
=0V，I
D
=100mA
[3]
V
GS(OFF)
Gate-to-Source Cut-off Voltage
--
--
-27
V
V
DS
=9V, I
D
=8µA
V
CL
Source-to-Gate Clamp Voltage
11.5
--
--
V
V
DS
=9V, I
D
=5mA
Source-Drain Diode Characteristics T
A
=25℃ unless otherwise specified
Symbol
Parameter
Min
Typ.
Max.
Units
Test Conditions
V
SD
Diode Forward Voltage
--
--
1.2
V
I
SD
=100 mA, V
GS
=-30 V
NOTE：
[1] T
J
=+25℃ to +150℃
[2] Repetitive rating, pulse width limited by maximum junction temperature.
[3] Pulse width≤380µs; duty cycle≤2%.