CRIMPFLEX™ Catalogue
Erratum v1.1
Page 1 of 1
Date: 14 / 04 / 2010
NIC
OMATIC HEADQUARTERS
173, rue des Fougères / ZI Les Bracots
74890 Bons-en-Chablais FRANCE
Tel: (33) 4 50 36 13 85 Fax: (33) 4 50 36 11 33
email: nicomatic@nicomatic.fr
Other mistakes are possible. Do not hesitate to let us know
under marketing@nicomatic.fr.
N°
PROBLEM / PRINTING MISTAKE OR
ERROR / NEW INFO
N°
PAGE
SOLUTION TO SOLVE THE PROBLEM IN
THE NEXT PRINT
1
The polarization keys under P/N PHK10 and PHK-101
used to be plugged into the CRIMPFLEX(tm) housings to
ensure polarization have been modified. Please use the
new customer drawing to see the dimensional differences
and do not use the catalogue information on page 21 any
more.
21 Change the drawing in the next edition of the catalogue.
2
New 0J and 0JH housings have been added to the
CRIMPFLEX 2.54mm product range. They offer an
enhanced protection for the latch especially needed in
vibration environments. The new housing features
an extra
mechanical protection to prevent the latch from breaking or
tearing in case of strong vibration. Indeed, the latch is
protected by 2 plastic” ends” that are on each side of the
latch and prevent it to move left or right. The product also
features 4 chamfers for an easier insertion guiding to the
counterpart.
Not yet
in
Add in the next issue (in the meantime please consult our
website)
3
A printing mistake has occurred in the product catalogue
on the temperature range for CrimpFlex™ housings. We
indicate -55°C to +150°C while the correct figures are -
40°C to +150°C. 21
Correct in the next issue (PS. This is not impacted on the
2D drawings that do not indicate the T° range).