A
Antenna Model
PNL90206
Operating Frequency (MHz)
902-928
Peak Gain (dBi)
6.0
VSWR
1.7:1
Polarization
Left-hand, circular
Plastic Cover Color
Black
Weight – kg (lb.)
1.40 (3.09)
Max Power - Ambient 25°C (W)
10
Dimensions – mm (in.)
261 x 261 x 65.9 (10.28 x 10.28 x 2.59)
Nominal Impedance (Ω)
50
Connector Type
Model-specific
Mounting
Table mount
Material Substance Compliance
RoHS
Please read all instructions carefully before attempting to install and use this
product.
This antenna should be mounted permanently and securely on a mounting
panel in accordance with all installation instructions.
For best results, mount the antenna towards the center of the coverage
area. A line-of-sight path between the antenna and active floor locations
works best. Although signals in these bands penetrate interior walls with
little attenuation, reinforced block walls, banks of metal cabinets, or steel
shelving may attenuate signals or cause multipath, a condition where
reflected signals interfere with the primary signal path. Avoid mounting
next to a column or vertical support that could create a “shadow zone” of
reduced coverage.
These PNL90206 series antennas have two types of cable routing exits:
▪ Side exit – PNL90206SC
▪ Bottom exit – PNL90206BC
See Figure 1 for details on mounting with the provided hardware kit.
.
sales@lairdconnect.com
support@lairdconnect.com
www.lairdconnect.com
Laird warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to conditions and limitations Laird will, at its
option, either repair or replace any part of its products that prove defective because of improper workmanship or materials. This limited warranty is in force for the useful lifetime of the
original end product into which the Laird product is installed. Useful lifetime of the original end product may vary but is not to exceed five (5) years from the original date of the end product
purchase.
Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application
of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness,
merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products
are sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request.
© Copyright 2019 Laird Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Inc. or an affiliate company
thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third-party intellectual property rights.
Figure 1