19 S 1 01- 4 0M L5
Plating Code
01-Z9 Cable Group (see last page)
00 Blank
0M Surface Mount Device
0P Press-fit Version
0 Clamp Version, Accessories
1 Crimp Version
2 Solder Version, Solder Pot
3 Solder Crimp Version
4 PCB Mounting
5 Solid Center Contact, Coax Transition
6 Stripline
7 Microstrip
8 Crimp Version - Pigtail
K Adaptors female (2nd end)
S Adaptors male (2nd end)
Successive Number
1 Straight Connector
2 Right Angle Connector
3 T-or Y-Adapter
4 Panel Connector with 4-hole Flange
5 Panel Connector with Round Flange
6 Panel Connector with Hexagonal Flange
7 Panel Connector with 2-hole Flange
K Female Connector, Jack
S Male Connector, Plug
P Sexless
W Tool
Z Accessories
Rosenberger Connector Series Code (overview see next page)
Code Plating Symbol
Layer thickness Magnetic Properties
A Nickel Ni 3.00 μm
B Silver Ag 3.00 μm Non magnetic
E Gold Au 0.80 μm
F Gold Au 0.10 μm
H Gold selective Au 1.27 μm
L AuroDur
®
Au 0.15 μm Non magnetic
N White bronze*
)
Non magnetic
S Stainless Steel
T Tin/Lead Sn 6.00- 8.00 μm Non magnetic
Code Plating Symbol
Layer thickness Magnetic Properties
1 Silver Ag 3.00 μm Non magnetic
3 Gold Au 1.27 μm
4 Gold Au 0.80 μm
5 AuroDur
®
Au 0.15 μm Non magnetic
Plating Code
The used platings of outer and center contacts of Rosenberger connectors are
defined by the last two digits of the Rosenberger Number.
Example: 19 S 101 - 40M L5
Plating outer contact: AuroDur
®
(L) Au 0.15 μ
Plating center contact: AuroDur
®
(5) Au 0.15 μ
Outer Contact
Center Contact
*White bronze (e.g.Optalloy
®
) Flash white bronze over silver (e.g. Optargen
®
)
Rosenberger Number Code Rosenberger Standard Plating Code
AuroDur
®
– the Rosenberger Standard Plating
for Gold Surfaces
AuroDur
®
plating is the standard gold surface for all Rosenberger connector series.
AuroDur
®
has been developed by the engineering and metallurgical team at Rosenberger,
well-experienced in developing electroplating standard and customized surfaces.
The AuroDur
®
surface consists of a thin gold layer (0.15 μm) on a non-magnetic,
chemically deposited layer of nickel (2-3 μm).
AuroDur
®
gold plating fully satisfies the high mechanical and electrical demands of radio
frequency connectors. In contrast to conventional platings, essential characteristics
are improved.
Properties:
f high abrasion and corrosion resistance
f excellent intermodulation
f low contact resistance
f very good solderability
f optimal distribution of layer thickness
f RoHS conform
Packaging
Blister: 2-piece plastic blister in various variants
Box: Carton in various sizes with various inlays
Standard: Plastic bag in various sizes
Tape & Reel: Carrier tapes on on rolls in various variants
details please see chapter Packaging
Rosenberger Codes
Code
01 RPC-1.00 (W) - 110 GHz
02 RPC-2.92 (K) - 40 GHz
03 RPC-3.50 - 26.5 GHz
04 RPC-SL 26.5 - 26.5 GHz
05 RPC-N 50 Ω - 18 GHz
06 RPC-TNC - 18 GHz
07 RPC-7 - 18 GHz
08 RPC-1.85 (V) - 70 GHz
09 RPC-2.40 - 50 GHz
10 RPC-SP (BMA) - 22 GHz
P4 RPC-SL 40 - 40 GHz
P5 RPC-N 75 Ω - 4 GHz
Code
11 Tools
15 Micro-RF
16 FMC
17 Longwipe-SMP
18 Mini-SMP
19 SMP
20 MMCX
23 Inserts Mini-Coax
24 Mini-UHF
25 Inserts High Voltage DIN 41626
26 FME
27 IEC Antenna 75 Ω
28 QMA
29 MCX
30 SSMA
31 Microdot
32 SMA
32R SMA reverse
34 1.0-2.3 DIN 47297 50 Ω
35 SSMB
38 SSMC
39 SMC
40 MCX 75 Ω
41 MHV (High Voltage BNC)
42 HV 4-10 (High Voltage C)
43 HN (High Voltage N)
45 Inserts 1.0-2.3 DIN 41626 50 Ω
47 SSMG
49 SMG
50 Inserts High Power DIN 41626 / D-Sub
51 BNC 50 Ω
Code
51R BNC reverse
52 C 50 Ω
53 N 50 Ω
53Q SnapN
54 UHF
55 Inserts D-Sub
56 TNC 50 Ω
56R TNC Reverse
57 SHV (Safe High Voltage)
59 SMB 50 Ω, FAKRA
60 7-16
64 4.3-10
65 4.1-9.5
71 BNC 75 Ω
72 C 75 Ω
73 N 75 Ω
74 F
75 Inserts 1.0-2.3 DIN 41626 75 Ω (intermateable with 50 Ω)
76 TNC 75 Ω
78 1.6-5.6 II Generation
81 Twinax
88 1.6-5.6 III Generation
99 Specials
119 P-SMP
153Q QN
734 1.0-2.3 DIN 47297 75 Ω
745 Inserts 0.8-2.7 DIN 41626 75 Ω
759 SMB 75 Ω acc. to BT 43
D4 RosenbergerHSD
®
E4 RosenbergerHSD
®
e
Precision Connector Series
Classical Coaxial Connector Series
Rosenberger Connector Series Code