ZMOTION

™

DETECTION &

CONTROL FAMILY ADVANTAGES

 MCU, PIR SENSOR, AND LENS

SOLUTION

 MOTION DETECTION ALGORITHMS

BUILT INTO MCU

 4 KB FLASH FOR APPLICATION CODE

 OPTIMIZED DETECTION

PERFORMANCE AND RELIABILITY

 BETTER STABILITY AND SENSITIVITY

THAN TRADITIONAL DESIGNS

 NO TEMPERATURE COMPENSATION

REQUIRED

 NO NEED TO DEVELOP COMPLEX

MOTION DETECTION SOFTWARE

 LARGE SELECTION OF LENSES

AVAILABLE WITH OPTIMIZED SETTINGS

PROVIDED

 ZMOTION MCU AVAILABLE

SEPARATELY TO USE WITH YOUR OWN

LENS/PYRO

 DIRECT SENSOR INTERFACE

ELIMINATES EXTERNAL COMPONENTS

 REDUCED BOM COSTS

 COMPLETE YOUR DESIGNS FASTER

Zilog’s ZMOTION

™

Detection and Control Family

Featuring PIR Technology

Superior Motion Detection Solutions Enabling Faster Development Cycles

Overview

Zilog’s ZMOTION

™

Detection and Control Product Family is a series of high-performance microcontrollers with

integrated motion detection algorithms combined with a selection of lenses and Passive Infrared (PIR) sensors to

fit a wide range of application requirements. Optimized configuration parameters for the ZMOTION

™

MCU are provided for each lens/sensor combination ensuring the best possible performance while significantly

reducing development risk and minimizing time to market.

Zilog’s ZMOTION

™

MCU combines the programmability and rich peripheral set of the Flash-based Z8F042A

Encore! XP

MCU with built-in software-based motion detection algorithms. These motion detection algorithms

comprise the PIR engine and run in the background of the MCU while control and status of the engine is accessed

through a software API (Application Programming Interface). Create your own application-specific software while

taking advantage of Zilog’s Enhanced PIR motion-detection technology.

Optimize the performance of your product by choosing a lens that closely matches your application. Use your own

or select from our family of lenses spanning 360 degree ceiling, 180 degree wall mount, 25 meter long range, and

5 meter short range. API settings are provided to match the PIR engine operation to each of the lens and PIR

sensor combinations provided.

Zilog’s Enhanced PIR motion-detection technology provides a dramatic improvement in both sensitivity and

stability over traditional designs and is scalable to many market segments including Lighting Control, HVAC,

Access Control, Vending, Display, Proximity, Power Management, Occupancy Sensing, and many others.

ZMOTION

™

MCU Block Diagram

PB022504-0112

MOTION CONTROL AND LIGHTING SOLUTIONS

Zilog’s ZMOTION

™

Detection and Control Family

ZMOTION

™

Detection and Control Family

ADVANCED MOTION DETECTION SOLUTIONS

MOTION DETECTION SOLUTIONS

KEY FEATURES

 ADVANCED STATISTICALLY BASED

MOTION DETECTION PROCESSING

 4 KB FLASH FOR APPLICATION CODE

 SUPPORTS DESIGNS REQUIRING 1 OR

2 PIR SENSORS

 HYPERSENSE MODE FOR LIGHTING

APPLICATIONS

 HIGH RESOLUTION SIGMA DELTA ADC

 LOW POWER MODES

 API PROVIDES FULL CONTROL AND

STATUS OF MOTION DETECTION

ENGINE

 WORLD CLASS ZDS-II DEVELOPMENT

ENVIRONMENT

ZMOTION

™

Detection and Control Family Feature Set

 Optimized assemblage of MCU, Lens, and PIR Sensor

 High-performance eZ8

MCU core

 4 KB in-circuit programmable Flash available for application code

 Single-pin debug with unlimited breakpoints

 Internal precision oscillator running at 5.53 MHz

 External oscillator operating up to 20 MHz

 Sigma Delta ADC with up to 6 channels single ended or 3 channels differential available

 On-chip analog comparator with independent programmable reference voltage

 Full-duplex UART with dedicated BRG

 Two 16-bit timers with input capture, output compare, and PWM capability (11 modes total)

 Watchdog timer (WDT) with dedicated internal oscillator

 6 to 25 I/O pins depending upon package

 2.7 V to 3.6 V operating voltage with extended operating temperature range —40

C to +105

 Enhanced PIR software engine controlled and monitored through software API registers

 Select from an assortment of lenses and pyroelectric sensors to best fit your application

 Optimized API settings provided for each lens and pyroelectric sensor combination

 Create your own API settings to match your own lens

 Directly supports 1 or 2 pyroelectric sensors

 Sensitivity control, range control, and directionality detection

 Hypersense detection mode for Occupancy sensing

 Low power modes

With Zilog’s ZMOTION

™

Detection and Control Solution, the system bill of materials is significantly reduced.

The pyroelectric sensor is directly interfaced to the MCU eliminating external op-amps, electrolytic

capacitors, and other components used in traditional designs. The new statistical processing algorithms

provided by the Enhanced PIR motion-detection engine also eliminate the need for a discrete temperature

compensation circuit.

This all leads to a simpler and smaller circuit design, providing better reliability, sensitivity, and stability

than traditional designs.