Module Selection Guide
Input Model
Speed
/
Resolution
CH Isol.
Max Input
(
DC+AC
p
eak
)
DC Accurac
y
(
T
yp
ical
)
Features
Analog voltage 701250 10 MS/s 12-bit 2 Yes
600 V
1
250 V
2
±0.5% 10 MS/s 12-bit, bandwidth 3 MHz, 3 times more accurate (0.5%), high noise immunity
701251 1 MS/s 16-bit 2 Yes
600 V
1
140 V
2
±0.25%
1 MS/s 16-bit, bandwidth: 300 kHz, high accuracy (0.25%)
high sensitivity range (1 mV/div), low residual noise (±100 μVtyp), high noise immunity
701260 100 kS/s 16-bit 2 Yes
1000 V
1
850 V
2
±0.25% High voltage (direct 850 V input), high accuracy (0.25%), with RMS, high noise immunity
701255 10 MS/s 12-bit 2 No
600 V
3
1
250 V
2
±0.5% 10 MS/s, 12-bit non-isolated, non-isolated version of the 701250
Temperature 701261/62
100 kS/s 16-bit (Voltage)
500 S/s (Temperature)
2 Yes 42 V ±0.25% (voltage)
Universal modules (both temperature and voltage input), voltage, 100 KS/s16 bit, temperature 500 S/s, wide
voltage range (20 V-5 mV/div), TC （KEJTLUNRSBW iron-doped, gold/chromel), with anti-aliasing filter
(701262).
Temperature 701265 500 S/s 16-bit 2 Yes 42 V ±0.08% (voltage)
Both temperature/voltage inputs, bandwidth: 100 Hz, thermocouple (KEJTLUNRSBW ,iron doped
gold/chromel), High accuracy voltage (0.08%), high sensitivity range (100 μV/div), low internal noise
(
±4
μ
Vt
yp)
Acceleration 701275 100 kS/s 16-bit 2 Yes 42 V
±0.25% (voltage)
±0.5%
(
accl.
)
Both acceleration/voltage input, built-in antialiasing filter, high accuracy (0.25%)
su
orts am
-internal acceleration sensors
4 mA/22 V
Strain 701270 100 kS/s 16-bit 2 Yes 42 V ±0.5% (strain) Supports strain NDIS, 2 times higher accuracy (0.5%), 2/5/10 V internal bridge power supply
701271 100-kS/s 16-bit 2 Yes 42 V ±0.5% (strain)
Supports strain DSUB, 2 times higher accuracy (0.5%), 2/5/10 V internal bridge power supply, shunt
CAL
Frequency 701280 25 kS/s 16-bit 2 Yes
420 V
1
42 V
2
±0.1% (freq)
Measuring frequency 0.01 Hz-200 kHz, measuring items (frequency, rotations, period, duty, power
supply frequency, pulse count, and velocity),
1 (when using the 10:1 isolation probe (700929)) 2 (when using the 1:1 safety adapter lead (701901)) 3 (when using the 10:1 passive probe (701940))
Supports 16 CH • High Accuracy • High Noise Immunity • Low Internal Noise