1. Feature List
The ZGM130S highlighted features are listed below.
• Low Power Wireless System-on-Chip.
•
High Performance 32-bit, 39 MHz ARM Cortex
®
-M4 with
DSP instruction and floating-point unit for efficient signal
processing
•
Embedded Trace Macrocell (ETM) for advanced debugging
• 512 kB flash program memory (64 kB available for user ap-
plications)
• 64 kB RAM data memory (8kB available for user applica-
tions)
• TX power up to 13 dBm
• Supports optional external SAW filter
• Low Energy Consumption
• 9.8 mA RX current at 100 kbps, GFSK, 868 MHz
• 40.7 mA TX current at 13 dBm output power at 868 MHz
• 13.3 mA TX current at 0 dBm output power at 908 MHz
• 69 μA/MHz in Active Mode (EM0)
• 0.8 μA EM4 current (128 Byte RAM retention and RTCC
running from LFRCO)
• High Receiver Performance
• -97.9 dBm sensitivity at 100 kbit/s GFSK, 868 MHz
• -97.5 dBm sensitivity at 100 kbit/s GFSK, 915 MHz
• Supported Protocols:
• Z-Wave
• Support for Internet Security
• General Purpose CRC
• True Random Number Generator (TRNG)
• 2 × Hardware Cryptographic Acceleration for AES 128/256,
SHA-1, SHA-2 (SHA-224 and SHA-256) and ECC
• Wide selection of MCU peripherals
•
12-bit 1 Msps SAR Analog to Digital Converter (ADC)
• 2 × Analog Comparator (ACMP)
• 2 × Digital to Analog Converter (VDAC)
• 3 × Operational Amplifier (Opamp)
• Digital to Analog Current Converter (IDAC)
• Low-Energy Sensor Interface (LESENSE)
• Multi-channel Capacitive Sense Interface (CSEN)
• 32 pins connected to analog channels (APORT) shared be-
tween analog peripherals
• 32 General Purpose I/O pins with output state retention and
asynchronous interrupts
• 8 Channel DMA Controller
• 12 Channel Peripheral Reflex System (PRS)
• 2 × 16-bit Timer/Counter
• 3 or 4 Compare/Capture/PWM channels
• 1 × 32-bit Timer/Counter
• 3 Compare/Capture/PWM channels
• 32-bit Real Time Counter and Calendar
• 16-bit Low Energy Timer for waveform generation
• 32-bit Ultra Low Energy Timer/Counter for periodic wake-up
from any Energy Mode
• 16-bit Pulse Counter with asynchronous operation
• 2 × Watchdog Timer
• 3 × Universal Synchronous/Asynchronous Receiver/Trans-
mitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I
2
S)
•
Low Energy UART (LEUART
™
)
•
2 × I
2
C interface with SMBus support and address recogni-
tion in EM3 Stop
• Wide Operating Range
• 1.8 V to 3.8 V single power supply
• Integrated DC-DC
• -40 °C to 85 °C
• Dimensions
• 9 × 9 × 1.21 mm
ZGM130S Z-Wave 700 SiP Module Data Sheet
Feature List
silabs.com | Building a more connected world. Rev. 1.0 | 2