DF5A6.8LJE
2014-03-01
1
TOSHIBA Diodes for Protecting against ESD
DF5A6.8LJE
Product for Use Only as Protection against Electrostatic
Discharge (ESD)
* This product is for protection against electrostatic discharge (ESD) only
and is not intended for any other usage, including without limitation,
the constant voltage diode application.
• The mounting of four devices on an ultra-compact package allows the
number of parts and the mounting cost to be reduced.
• Low Terminal capacitance (between Cathode and Anode)
: C
T
= 6.0 pF (typ.)
Absolute Maximum Ratings
(Ta = 25°C)
Characteristics Symbol Rating Unit
Power dissipation P
100 mW
Junction temperature T
j
150 °C
Storage temperature range T
stg
−55 to 150 °C
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Electrical Characteristics
(Ta = 25°C)
Characteristics Symbol Test Condition Min Typ. Max Unit
Zener voltage V
Z
I
Z
= 5 mA 6.5 6.8 7.1 V
Dynamic impedance Z
Z
I
Z
= 5 mA ⎯ ⎯ 50 Ω
Reverse current I
R
V
R
= 5 V ⎯ ⎯ 0.5 μA
Terminal capacitance
(between Cathode and Anode)
C
T
V
R
= 0 V, f = 1 MHz ⎯ 6.0 ⎯ pF
Guaranteed Level of ESD Immunity
Test Condition ESD Immunity Level
IEC61000-4-2
(Contact discharge)
± 8 kV
Criterion: No damage to device elements
Unit: mm
1.CATHODE1
2.ANODE
3.CATHODE2
4.CATHODE3
5.CATHODE4
JEDEC ⎯
JEITA ⎯
TOSHIBA 1−2W1A
Weight: 0.003 g (typ.)
Start of commercial production
2003-02