SCALE™-2 1SP0635x2x1(C)-FD1200R17HP4-K_B2
www.power.com/gate-driver Page 1
1SP0635x2x1-FD1200R17HP4-K_B2 and
1SP0635x2x1C-FD1200R17HP4-K_B2
Data Sheet
Compact, high-performance, plug-and-play single-channel IGBT driver based
on SCALE™-2 technology for individual and parallel-connected modules in
2-level, 3-level and multilevel converter topologies
Abstract
The SCALE™-2 plug-and-play driver 1SP0635x2x1-FD1200R17HP4-K_B2 / 1SP0635x2x1C-FD1200R17HP4-
K_B2 (Coated version using ELPEGUARD SL 1307 FLZ/2 from Lackwerke Peters with a typical thickness of
50µm) is a compact single-channel intelligent gate driver designed for Infineon’s IGBTs FD1200R17HP4-K_B2.
The master driver 1SP0635x2M1(C)-FD1200R17HP4-K_B2 features a fiber-optic interface with a built-in
isolated DC/DC power supply. It can be used as stand-alone driver or in conjunction with up to three
1SP0635D2S1(C)-FD1200R17HP4-K_B2 slaves to drive up to four parallel-connected IGBT modules of type
FD1200R17HP4-K_B2.
For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to:
www.power.com/gate-driver/go/plug-and-play
Features Applications
Plug-and-play solution
Allows parallel connection of IGBT modules
For 2-level, 3-level and multilevel topologies
Built-in isolated DC/DC power supply (master)
Fiber-optic links (master)
Built-in interface to 1SP0635D2S1(C) (slave)
Duty cycle 0...100%
Dynamic Advanced Active Clamping DA
2
C
Dynamic IGBT short-circuit protection
Monitoring of supply voltage
Monitoring of gate voltage
Extremely reliable; long service life
Shortens application development time
Suitable for FD1200R17HP4-K_B2
Traction
Railroad power supplies
Light rail vehicles
HVDC
Flexible AC transmission systems (FACTS)
Medium-voltage converters
Industrial drives
Wind-power converters
Medical applications
Research
And many others
SCALE™-2 1SP0635x2x1(C)-FD1200R17HP4-K_B2
Data Sheet
www.power.com/gate-driver Page 2
Safety Notice!
The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high-
voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory!
Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive
devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the
workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged.
Important Product Documentation
This data sheet contains only product-specific data. For a detailed description, must-read application notes and
common data that apply to the whole series, please refer to the “Description & Application Manual for
1SP0635 SCALE-2 IGBT Drivers” on www.power.com/gate-driver/go/1SP0635.
When applying SCALE-2 plug-and-play drivers, please note that these drivers are specifically adapted to a
particular type of IGBT module. Therefore, the type designation of SCALE-2 plug-and-play drivers also includes
the type designation of the corresponding IGBT module. These drivers are not valid for IGBT modules other
than those specified. Incorrect use may result in failure.
Mechanical Dimensions
Dimensions: Refer to the relevant “Description and Application Manual”
Mounting principle: Connected to IGBT module with screws
Fiber-Optic Interfaces (1SP0635x2M1(C))
Interface Remarks Part type #
Drive signal input 1SP0635V, fiber-optic receiver (Notes 1, 2) HFBR-2522ETZ
Drive signal input 1SP0635S, fiber-optic receiver (Notes 1, 2) HFBR-2412Z
Status output 1SP0635V, fiber-optic transmitter (Notes 1, 3) HFBR-1522ETZ
Status output 1SP0635S, fiber-optic transmitter (Notes 1, 3) HFBR-1412Z
Electrical Connectors
Interface Remarks Part type #
Power supply connector X1 1SP0635x2M1(C), on-board connector (Note 4) 214012
Bus connectors X2 and X3 On-board connectors (Note 5) 214013