GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
1.5KE6.8 THRU 1.5KE440CA(GPP)
Breakdown Voltage 6.8 to 440 Volts
1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION)
Peak Pulse Power 1500 Watts
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• Glass passivated junction or silastic guard junction
(open junction)
• 1500W peak pulse power capability with a 10/1000μs
Waveform, repetition rate (duty cycle): 0.05%
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time: typically less than 1.0ps from 0 Volts to
V(BR) for unidirectional and 5.0ns for bidirectional types
• Devices with V(BR)≥10V, ID are typically less than 1.0μA
• High temperature soldering guaranteed:
265℃/10 seconds, 0.375” (9.5mm) lead length,
51bs.(2.3kg) tension
MECHANICAL DATA
• Cass: molded plastic body over passivated junction
• Terminals: plated axial leads, solderable per
MIL-STD-750, Method 2026
• Polarity: Color bands denotes positive end (cathode) except for bidirectional
• Mounting Position: any
• Weight: 0.045 ounces, 1.2 grams
DEVICES FOR BIDRECTIONAL APPLICATIONS
• For bidirectional use C or CA suffix for types 1.5KE6.8 thru types 1.5K440 (e.g. 1.5KE6.8C,
1.5KE440CA).Electrical Characteristics apply in both directions.
• Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
Ratings Symbols
Value Unit
Peak Pulse power dissipation with a 10/1000μs waveform (NOTE1)
PPPM Minimum 400
Watts
Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.1)
IPPM See Table 1 Amps
Steady Stage Power Dissipation at TL=75℃
Lead lengths 0.375”(9.5mm)(Note2)
PM(AV)
5.0
Watts
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method) unidirectional only
IFSM
200.0
Amps
Maximum instantaneous forward voltage at 100.0A for
unidirectional only (NOTE 3)
VF
3.5/5.0
Volts
Operating Junction and Storage Temperature Range TJ, TSTG 50 to +150
℃
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2
2. Mounted on copper pads ares of 0.8×0.8”(20×20mm) per Fig 5.
3. VF=3.5 V for devices of V
(BR) ≤200V, and VF=5.0 Volts max. for devices of V(BR)＞200v
1.0(25.4)
MIN
MIN
1.0(25.4)
.375(9.5)
.335(8.5)
DIA
.038(0.96)
.042(1.06)
DIA
.220(5.6)
.197(5.0)
Dimensions in inches and (millimeters)
DO-201(DO-27)
Web Site: www.hkmic.com
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
1.5KE6.8 THRU 1.5KE440CA(GPP)
Breakdown Voltage 6.8 to 440 Volts
1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION)
Peak Pulse Power 1500 Watts
Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE1
Breakdown Voltage
V(BR)(Volts) (Note 1)
Device
Type
MIN
MAX
Test
Current
at
IT
(mA)
Stand-off
Voltage
VWM
(Volts)
Maximum
Reverse
Leakage at
VWM ID (μA)
Maximum
Peak Pulse
Current
IPPM (Note 2)
(Amps)
Maximum
Clamping
Voltage at
IPPM
VC(Volts)
Maximum
Temperature
Coefficient
of V(BR)
(%/℃)
1.5KE6.8/J 6.12 7.48 10 5.5 1000 139 10.8
0.057
1.5KE6.8A/J 6.45 7.14 10 5.8 1000 143 10.5
0.057
1.5KE7.5/J 6.75 8.25 10 6.05 500 128 11.7
0.061
1.5KE7.5A/J 7.13 7.88 10 6.4 500 133 11.3
0.061
1.5KE8.2/J 7.38 9.02 10 6.63 200 120 12.5
0.065
1.5KE8.2A/J 7.79 8.61 10 7.02 200 124 12.1
0.065
1.5KE9.1/J 8.19 10 1 7.37 50 109 13.8
0.068
1.5KE9.1A/J 7.65 9.55 1 7.78 50 112 13.4
0.068
1.5KE10/J 9 11 1 8.1 10 100 15
0.073
1.5KE10A/J 9.5 10.5 1 8.55 10 103 14.5
0.073
1.5KE11/J 9.9 12.1 1 8.92 5 92.6 16.2
0.075
1.5KE11A/J 10.5 11.6 1 9.4 5 96.2 15.6
0.075
1.5KE12/J 10.8 13.2 1 9372 5 86.7 17.3
0.076
1.5KE12A/J 11.4 12.6 1 10.2 5 89.8 16.7
0.078
1.5KE13/J 11.7 14.3 1 10.5 5 78.9 19
0.081
1.5KE13A/J 12.4 13.7 1 11.1 5 82.4 18.2
0.081
1.5KE15/J 13.5 16.5 1 12.1 5 68.2 22
0.084
1.5KE15A/J 14.3 15.8 1 12.8 5 70.8 21.2
0.084
1.5KE16/J 14.4 17.6 1 12.9 5 63.8 23.5
0.086
1.5KE16A/J 15.2 16.8 1 13.6 5 66.7 22.5
0.086
1.5KE18/J 16.2 19.8 1 14.5 5 56.6 26.5
0.088
1.5KE18A/J 17.1 18.9 1 15.3 5 59.5 25.2
0.089
1.5KE20/J 18 22 1 16.2 5 51.5 29.1
0.09
1.5KE20A/J 19 21 1 17.1 5 54.2 27.7
0.09
1.5KE22/J 19.8 24.2 1 17.8 5 47 31.9
0.092
1.5KE22A/J 20.9 23.1 1 18.8 5 49 30.6
0.092
1.5KE24/J 21.6 26.4 1 19.4 5 43.2 34.7
0.094
1.5KE24A/J 22.8 25.2 1 20.5 5 45.2 33.2
0.094
1.5KE27/J 24.3 29.7 1 21.8 5 38.4 39.1
0.096
1.5KE27A/J 25.7 28.4 1 23.1 5 40 37.5
0.096
1.5KE30/J 27 33 1 24.3 5 34.5 43.5
0.097
1.5KE30A/J 28.5 31.5 1 25.6 5 36.2 41.4
0.097
1.5KE33/J 29.7 36.3 1 26.8 5 31.4 47.7
0.098
1.5KE33A/J 31.4 34.7 1 28.2 5 32.8 45.7
0.098
1.5KE36/J 32.4 39.6 1 29.1 5 28.8 52
0.099
1.5KE36A/J 34.2 37.8 1 30.8 5 30.1 49.9
0.099
1.5KE39/J 35.1 42.9 1 31.6 5 26.6 56.4
0.1
1.5KE39A/J 37.1 41 1 33.3 5 27.8 53.9
0.1
1.5KE43/J 38.7 47.3 1 34.8 5 24.2 61.9
0.101
1.5KE43A/J 40.9 45.2 1 36.8 5 25.3 59.3
0.101
1.5KE47/J 42.3 51.7 1 38.1 5 22.1 67.8
0.101
1.5KE47A/J 44.7 49.4 1 40.2 5 23.1 64.8
0.101
1.5KE51/J 45.7 56.1 1 41.3 5 20.4 73.5
0.102
1.5KE51A/J 48.5 43.6 1 43.6 5 21.4 70.1
0.102
1.5KE56/J 50.4 61.6 1 45.4 5 18.6 80.5
0.103
1.5KE56A/J 53.2 58.8 1 47.8 5 19.5 77
0.103
1.5KE62/J 55.8 68.8 1 50.2 5 16.9 89
0.104
1.5KE62A/J 58.9 65.1 1 53 5 17.6 85
0.104
Web Site: www.hkmic.com