TEST REPORT
SAMPLE DESCRIPTION :
COLOR :
LOT NO. :
MATERIAL COMPOSITION :
COUNTRY OF ORIGIN :
COUNTRY OF DESTINATION :
SAMPLE RECEIVED :
TESTING PERIOD :
SAMPLE SUBMITTED BY :
TEST REQUESTED :
TEST RESULT(S)
:
PLEASE REFER TO NEXT PAGE(S).
BLACK.
Chemical Laboratory - Kao.,SGS Taiwan Ltd.
ROGERS CORPORATION
171 WEST SAINT CHARLES ROAD, CAROL STREAM, ILLINOIS 60188
USA
THE FOLLOWING SAMPLE(S) WAS/WERE SUBMITTED AND IDENTIFIED BY/ON BEHALF OF THE CLIENT AS :
REPORT NO.KE/2018/C0372
DATE: 2018/12/14
PAGE: 1 OF 6
SILICONE BASE MATERIAL:HT 800 BLACK 0.094".
ROGERS CORPORATION.
==============================================================================================
(1)AS SPECIFIED BY CLIENT, WITH REFERENCE TO RoHS 2011/65/EU
ANNEX II AND AMENDING DIRECTIVE (EU) 2015/863 TO DETERMINE
CADMIUM, LEAD, MERCURY, CR(VI), PBBs, PBDEs, DBP, BBP, DEHP,
DIBP CONTENTS IN THE SUBMITTED SAMPLE(S).
(2) PLEASE REFER TO NEXT PAGES FOR THE OTHER ITEM(S).
18K05935002.
SILICONE FOAM.
USA.
TAIWAN.
2018/12/10 TO 2018/12/14.
2018/12/10.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號
t + 886 (07)301 2121 f + 886 (07)3010867 www.tw.sgs.com
Member of the SGS Group
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the
Company.除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and
jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits
of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under
the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or
appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.
TEST REPORT
PAGE: 2 OF 6
TEST ITEM(S)
METHOD
CADMIUM (Cd)
WITH REFERENCE TO IEC
62321-5:2013 AND
PERFORMED BY ICP-OES.
LEAD (Pb)
WITH REFERENCE TO IEC
62321-5:2013 AND
PERFORMED BY ICP-OES.
MERCURY (Hg)
WITH REFERENCE TO IEC
62321-4:2013 AND
PERFORMED BY ICP-OES.
CHROMIUM VI
WITH REFERENCE TO IEC
62321-7-2:2017 AND
PERFORMED BY UV-VIS.
POLYBROMINATED BIPHENYL
(PBBs)
---
MONOBROMOBIPHENYL
WITH REFERENCE TO IEC
62321-6: 2015 AND
PERFORMED BY GC/MS.
DIBROMOBIPHENYL
WITH REFERENCE TO IEC
62321-6: 2015 AND
PERFORMED BY GC/MS.
TRIBROMOBIPHENYL
WITH REFERENCE TO IEC
62321-6: 2015 AND
PERFORMED BY GC/MS.
TETRABROMOBIPHENYL
WITH REFERENCE TO IEC
62321-6: 2015 AND
PERFORMED BY GC/MS.
PENTABROMOBIPHENYL
WITH REFERENCE TO IEC
62321-6: 2015 AND
PERFORMED BY GC/MS.
HEXABROMOBIPHENYL
WITH REFERENCE TO IEC
62321-6: 2015 AND
PERFORMED BY GC/MS.
ppm
---
ppm
Chemical Laboratory - Kao.,SGS Taiwan Ltd.
UNIT
ppm
ppm
TEST RESULT(S)：
ppm
DATE: 2018/12/14
REPORT NO.KE/2018/C0372
RESULT
n.d.
MDL
2
2
2
n.d.
n.d.
ppm
ppm
ppm
ppm
ppm
8
---
5
5
5
5
5
5
n.d.
---
n.d.
n.d.
n.d.
n.d.
n.d.
n.d.
SGS Taiwan Ltd.
台灣檢驗科技股份有限公司
No. 61, Kai-Fa Road, Nanzih Export Processing Zone , Kaohsiung, Taiwan / 高雄市楠梓加工出口區開發路61號
t + 886 (07)301 2121 f + 886 (07)3010867 www.tw.sgs.com
Member of the SGS Group
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the
Company.除非另有說明，此報告結果僅對測試之樣品負責。本報告未經本公司書面許可，不可部分複製。
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and
jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits
of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under
the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or
appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.