Learn More:
For current information about Freescale
products and documentation, please visit
www.freescale.com/automotive.
Cost-Effective Development Tools
DEMO9S08QD4 US$59*
Cost-effective demonstration board with
potentimeter, LEDs, serial port and built-in
USB-BDM cable for debugging
and programming
CYCLONEPROE US$499*
HC08/HCS08/HC12/HCS12 stand-alone flash
programmer or in circuit emulator, debugger,
flash programmer; USB, serial or Ethernet
interface options
USBMULTILINKBDME US$99*
Universal HC08 in-circuit debugger and flash
programmer; USB-PC interface
CWX-HXX-SE Complimentary**
CodeWarrior
®
Special Edition for HC(S)08/
RS08 MCUs includes integrated development
environment, linker, debugger, unlimited
assembler, Processor Expert™ auto-code
generator, full-chip simulation and
16 KB C compiler
*Prices indicated are MSRP
**Subject to license agreement and registration
Package Options
Part Number Package Temp. Range
S9S08QD2J1MSC 8-pin SOIC -40°C to +125°C
S9S08QD2J1VSC 8-pin SOIC -40°C to +105°C
S9S08QD2J1CSC 8-pin SOIC -40°C to +85°C
S9S08QD4J1CSC 8-pin SOIC -40°C to +85°C
S9S08QD4J1VSC 8-pin SOIC -40°C to +105°C
S9S08QD4J1MSC 8-pin SOIC -40°C to +125°C
Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the
property of their respective owners. The HC08 products incorporate SuperFlash® technology licensed from SST.
© Freescale Semiconductor, Inc. 2007
Document Number: S08QD4AUTOFS
REV 1
Features Benefits
Integrated Analog Peripherals
• 4-ch., 10-bit ADC with automatic
compare function
• ADC channel connected to on-chip
temperature sensor
• Automatic compare function, software
programmable for greater-than, equal-to
or less-than conditions
• Asynchronous clock source
• Temperature sensor
• Internal bandgap reference channel
• Hardware triggerable using the real-time
interrupt counter
• Low-power and high-speed options
• Can be used for single slope APC and
resistance-capacitance time
• Easy interface to analog inputs/sensors
• Used to set conversion complete and
generate interrupt only when result
matches condition
• Can be used to run ADC when MCU clocks
are off, such as in STOP3 low-power mode
• Calculates temperature without any external
components and saves an ADC input channel
for other use
• Constant voltage source for calibrating ADC
results requires no external components
• Takes periodic measurements without CPU
involvement; can be used in STOP3 with
compare function to take measurement and
wake MCU from STOP3 only when compare
level is reached
• Flexible configuration to meet high
performance and low power requirements
Flexible Clock Options
• Internal clock source module containing
a frequency-locked loop controlled by
internal reference
• Can eliminate cost of external clock
components, use little board space and help
to increase system reliability
Two Timer Modules
• Two programmable 16-bit
timer/PWM modules
1 x 1-ch., 16-bit timer
1 x 2-ch., 16-bit timer
• Each channel can be used for input capture,
output compare, buffered edge-aligned pulse
width modulation (PWM) or buffered
center-aligned PWM
• One of the most cost-effective and flexible
timer modules; each channel is independently
programmable for input capture, output
compare or buffered edge-aligned PWM or
buffered center-aligned PWM
• Timer overflow interrupt can be enabled to
generate periodic interrupts for time-based
software loops
• Two separate time bases provide different
interrupt options
System Protection
• Watchdog computer operating properly reset
with option to run from dedicated 1 kHz
internal clock source or bus clock
• Low-voltage detection with reset or interrupt
• Illegal opcode detection with reset
• Flexible flash block protection
• Security feature for flash and RAM
• Always-on power-on reset circuitry
• Resets device in instance of runaway or
corrupted code, and independent clock
source provides additional protection in case
of loss of clock
• Allows system to write/save important
variables before voltage drops too low
• Can hold device in reset until reliable voltage
levels are reapplied to the part
• Helps to secure code sections so that they
cannot be accidently corrupted by
runaway code
• Option to protect various block sizes
• Option to put bootloader code in protected
space and clear flash for reprogramming
• Helps prevent unauthorized access to
memory to protect a customer’s software
8-pin SOIC
3.9 mm x 4.9 mm body
50 mil/1.27 mm pitch