LIMITED WARRANTY
The media on which you receive ANRITSU Company software is warranted not to
fail to execute programming instructions due to defects in materials and workman
-
ship for a period of 90 days from date of shipment, as evidenced by receipts or other
documentation. ANRITSU Company will, at its option, repair or replace software
media that does not execute programming instructions if ANRITSU Company re
-
ceives notice of such defects during the warranty period. ANRITSU Company does
not warrant that the operation of the software shall be uninterrupted or error free.
EXCEPT AS SPECIFIED HEREIN, ANRITSU COMPANY MAKE NO WARRAN
-
TIES, EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIMS ANY WAR
-
RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
CUSTOMER’S RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR NEG
-
LIGENCE ON THE PART OF ANRITSU COMPANY SHALL BE LIMITED TO
THE AMOUNT THERETOFORE PAID BY THE CUSTOMER. ANRITSU COM
-
PANY WILL NOT BE LIABLE FOR DAMAGES RESULTING FROM LOSS OF
DATA, PROFITS, USE OF PRODUCTS, OR INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.
The aforestated limitation of the liability of ANRITSU Company will apply regard-
less of the form or action, whether in contract or tort, including negligence. Any ac-
tion against ANRITSU Company must be brought within one year after the cause of
action accrues. ANRITSU Company shall not be liable for any delay in performance
due to causes beyond its reasonable control.
TRADEMARK ACKNOWLEDGMENT
V Connector and K Connector are registered trademarks of ANRITSU Company.
Pentium is a registered trademark of Intel Corp., and Windows is a registered
trademark of Microsoft Corp.
NOTICE
ANRITSU Company has prepared this manual for use by ANRITSU Company per
-
sonnel and customers as a guide for the proper installation, operation and mainte
-
nance of ANRITSU Company equipment and computer programs. The drawings,
specifications, and information contained herein are the property of ANRITSU
Company, and any unauthorized use or disclosure of these drawings, specifications,
and information is prohibited; they shall not be reproduced, copied, or used in whole
or in part as the basis for manufacture or sale of the equipment or software pro
-
grams without the prior written consent of ANRITSU Company.