ADVANTAGES This IR CO sensor has been specially
optimized for the measurement of
Vol-% CO in cell incubators to ma-
nage ideal cell and tissue growth.
The sensor can be placed directly in
the incubation chamber to measure
the exact cell experienced environ-
ment. It determines the CO concent-
ration based on its IR radiation.
Micro-Hybrid gas sensor for reliable and
accurate CO measurement in incubators
GENERAL
Measuring gas CO
Measurement range – Vol.-%
Gas supply Diusion
Warm up time
< minute (start-up)
< minutes (full spec)
MEASUREMENT
Accuracy
± , Vol.-% ± % of reading
Response time (t
) ≤ s
Digital resolution , Vol.-%
Temperature dependence
≤ ± , Vol.-%
Pressure dependence
≤ ± , Vol.-%
Long term stability
≤ ± , Vol.-% at Vol.-% / year
Humidity correction … hPa HO
TECHNICAL SPECIFICATION
PRODUCT DATA SHEET
Incubator IR CO sensor
• IR dual beam technology
• Temperature and pressure
compensated
• Heat-sterilizable up to ° C
• Long lifetime
• Humidity correction
PRODUCT DATA SHEET | © Micro-Hybrid-Electronic GmbH | -
At ° C, hPa, dry test gas, excludes calibration gas tolerance of ± %
With compensation at Vol.% … Vol.% CO and ° C … ° C, hPa
With compensation at – hPa, ° C and Vol.% CO
Stability at ° C, without heat sterilization
ELECTRICAL
Supply voltage – V
DC
Power consumption < W
Digital output RS, Micro-Hybrid industrial protocol
Analogue output – mA
CLIMATIC CONDITIONS
Operating temperature ° C … ° C
Maximum temperature for
heat sterilization (only sensor)
° C
Humidity
< % relative humidity (rH),
not condensing
Storage temperature -° C … ° C
TECHNICAL SPECIFICATION
Visit us at www.micro-hybrid.de or call us at +
All rights reserved. All specications – technical included – are subject to change without notice.
No liability is accepted for any consequential losses, injury or damage resulting from the use of
this document or from any omissions or errors herein.
PRODUCT DATA SHEET
Micro-Hybrid gas sensor for reliable and
accurate CO measurement in incubators
Maximum humidity ≤ % rH, ≥ ° C auto standby – no CO measurement
ARTICLE NO: .A