Micro-Hybrid Numerical code
Thin lm radiation sources
JSIR350-4-...
Thin lm radiation source
JSIRAAA-
JSIR350-4-...
Chip
4 – Supreme chip active area square 2.2 x 2.2 mm²
5 – Supreme chip active area square 0.8 x 0.65 mm²
JSIR450-...
no chip
B-
CC-
JSIR350-4-AL-C-D5.8-0-0
Header
AL – TO39
BL – TO46
CB – SMD housing (for chip 4)
CS – SMD housing (for chip 5)
EEE-
JSIR350-4-AL-C-D5.8-0-0
Aperture
S5.0 – Square 5 x 5 mm² (only with body CB)
S2.8 – Square 2.8 x 2.8 mm² (only with body CS)
D2.4 – Diameter 2.4 mm (in combination with body BL)
D3.7 – Diameter 3.7 mm (only body AL)
D5.8 – Diameter 5.8 mm (only body AL)
D6.0 – Diameter 6 mm (only with reector)
F-
JSIR350-4-AL-C-D5.8-0-0
Filling gas
Kr – Krypton
N
2
– Nitrogen
Other lling gases on customers request.
GG
JSIR350-4-AL-C-D5.8-0-0
Window
0 – None
A1 – Sapphire
A2 – Calcium uoride
A3 – Germanium
A4 – Barium uoride
A5 - Silicone ARC 2 - 12 µm
A6 - Silicium 3 - 7 µm
More information and lters see lter
application note.
III
Hermetic Seal
I – Hermetically sealed by solde-
red window
(Only with cap
and lter A1, A3, A5, A6)
Unspecied; Window
glued to cap
D-
JSIR350-4-AL-C-D5.8-0-0
Cap
0 – None
C – Cap
R – Reector
NDIR GAS MEASUREMENT › Numerical code
Window
Thin lm radiation source
Cap / Reector
Header
Chip
Aperture
For Example
JSIR350-4-AL-C-D5.8-0-0
Type
Function
principle
Active area
[mm²]
Cut o
freq. [Hz]
Housing Design
Window /
Filter
Filling gas
JSIR350-4-AL-C-D5.8 Thin lm 2.2 x 2.2 8 TO 39 cap available available
JSIR350-4-AL-R-D6.0 Thin lm 2.2 x 2.2 8 TO 39 reector available available
JSIR350-4-CB-0-S5.0 Thin lm 2.2 x 2.2 8 SMD open on request none
JSIR350-5-BL-C-D2.55 Thin lm 0.65 x 0.8 9 TO 46 cap available available
JSIR350-5-BL-R-D3.6 Thin lm 0.65 x 0.8 9 TO 46 reector available available
JSIR350-5-CS-0-S2.8 Thin lm 0.65 x 0.8 9 SMD open on request none
JSIR450-AL-C-D3.7 Spiral wound 2.2 dia 0.3 TO 39 cap available available
JSIR450-AL-R-D6.0 Spiral wound 2.2 dia 0.3 TO 39 reector available available
For more information contact our sales team by Email to infrared@micro-hybrid.de or call +49 36601 592-0
IR sources product range
With this numerical code you can easily choose
the right combination of source parts according
to your applications demands.