Firmware Update Integra DSX-3
(10-24-2018)
We are pleased to offer this firmware update for the best possible
performance of your Integra AV Receiver.
This update may be installed via USB or Network. We
recommend USB for faster, more reliable installation.
DSX-3
(Current Version
2119-9030-3070-0010)
The 10/24/2018 update will address the following and includes
previous updates:
1. Adds support for Amazon Music.
*Amazon Music service requires that you have Amazon Prime
account or Amazon Music Unlimited account.
*Integra Control Pro App is required for initial set-up of Amazon
Music.
For detail about updated function, please refer to the link below.
http://integraworldwide.com/manual/sup/upd/amazon_int.pdf
2. Adds support for pass-through function of Dolby Vision signal.
3. Adds support for pass-through function of HLG(Hybrid Log-
Gamma) HDR signal.
4. Minor bug fixes and improvements stability.
The 8/21/2018 update will address the following and includes
previous updates:
1. Enhanced security.
2. Adds support for Deezer HiFi.
3. Depending on the Firmware version, update will be needed 2
times.
The 6/5/2018 update will address the following and includes
previous updates:
1. Minor bug fixes and stability improvements.
Previous Updates (latest firmware includes all previous)
The 4/4/2018 update will address the following:
1. Reduce noise during playback via USB/Network
The 1/29/2018 update will address the following:
1. Adds support for external audio inputs for "FlareConnect".
2. Minor bug fixes and improvements stability.
The 11/2/2017 update will address the following:
1. Adds support for new multi-room audio playback function
"FlareConnect".
*All audio devices in group and "Integra Control Pro" App is required
to update to the latest version.
• Setup Guide:
http://www.integrahometheater.com/wha_setup.php
2. Minor bug fixes and improvements stability.
The 8/31/2017 updates will address the:
1.
Adds support for DTS Play-Fi.
*To use Play-Fi, you need to download the application.
http://integraworldwide.com/manual/sup/upd/playfi_int.pdf
Before starting to use Play-Fi, set "On" at the "Network Standby" ("NET Stby")
setting. The unit will automatically power on and change the selector to "NET" or
"Network"
2. Adds support for "Dolby Atmos for 3.1.2ch".
3. Expand playable content of DTS:X.
4. Adds "Play Queue" function.