General
Specications
<<Contents>> <<Index>>
Models FH4A, FH4V
DC Converter
(Non-isolated Type)
Yokogawa Electric Corporation
2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan
Tel.: 81-422-52-7179 Fax.: 81-422-52-6619
GS 77J08H04-01E
GS 77J08H04-01E
©Copyright July 2007 (YK)
1st Edition July 17, 2007 (YK)
n General
The FH4A/FH4V is a compact, front terminal connec-
tion type converter that converts DC current or DC
voltage signals into DC current or DC voltage signals.
nModelandSufxCodes
nOrderingInformation
Specify the following when ordering.
•Modelandsufxcodes:e.g.FH4V-66*B
nInput/OutputSpecications
Input signal: DC current or DC voltage signal
Output signal: DC current or DC voltage signal
Input resistance:
DCcurrent
input
Input
resistance
DCvoltage
input
Input
resistance
4 to 20 mA 250Ω 0 to 10 mV 1MΩ durning
power on
100kΩduring
power off
2 to 10 mA 500Ω 0 to 100 mV
1 to 5 mA 1kΩ 0 to 1 V
0 to 20 mA 250Ω 0 to 10 V
0 to 16 mA 250Ω 0 to 5 V
0 to 10 mA 500Ω 1 to 5 V
0 to 1 mA 1kΩ -10 to +10 V
10 to 50 mA 100Ω
Maximum allowable input:
Voltage input: ±30 V DC or less
Currentinput:Anylevelthatsatisesthefollowing
condition,
(Input current)
2
xInputresistance≤0.5W
Allowable load resistance:
DC���current
output
Allowableload
resistance
DCvoltage
output
Allowableload
resistance
4 to 20 mA 750Ωorless 0 to 10 mV 250kΩormore
2 to 10 mA 1500Ωorless 0 to 100 mV 250kΩormore
1 to 5 mA 3000Ωorless 0 to 1 V 2kΩormore
0 to 20 mA 750Ωorless 0 to 10 V 10kΩormore
0 to 16 mA 900Ωorless 0 to 5 V 2kΩormore
0 to 10 mA 1500Ωorless 1 to 5 V 2kΩormore
0 to 1 mA 15kΩorless -10 to +10 V 10kΩormore
Zero adjustment: -5 to +5%
Span adjustment: 95 to 105%
nStandardPerformance
Accuracy rating: ±0.1% of span
Accuracy is not guaranteed for output
level less than 0.5% of the span of a 0 to
X mA output range type.
Response speed: 150 ms, 63% response (10 to 90%)
Insulationresistance:100MΩormoreat500VDC
between (input and output) and power
supply.
Withstandvoltage:500VAC/min.between(inputand
output) and power supply.
nEnvironmentalConditions
Operating temperature range: 0 to 50°C
Operating humidity range: 5 to 90% RH (no conden-
sation)
Power supply voltage: 24 V DC±10% (percentage
ripple 5%p-p or less)
Effectofpowersupplyvoltageuctuations:±0.1%or
lessfortheuctuationwithintheoperating
rangeofpowersupplyvoltagespecica
-
tion.
Effect of ambient temperature change: ±0.2% of span
or less for a temperature change of 10°C.
Current consumption: 24 V DC 102 mA (FH4A),
80 mA (FH4V)