Gap Pad
®
1450 is a highly compliant
Gap Pad
®
material that is ideal for fragile
component leads. The material includes a
PEN lm, which facilitates rework and
improves puncture resistance and
handling characteristics. The tacky side of
Gap Pad
®
1450 maintains a conformable,
yet elastic nature that provides excellent
interfacing and wet-out characteristics,
even to surfaces with high roughness or
uneven topography.
Gap Pad
®
1450 has inherent tack on one
side of the material, eliminating the need
for thermally impeding adhesive layers.
It is highly recommended that the PEN lm
be left intact. However, lm removal will
not have a signicant impact on thermal
performance.
Please contact your local Bergquist Sales
Representative for sample inquiries and
additional product information.
Note: To build a part number, visit our
website at www.bergquistcompany.com.
Gap Pad
®
1450
TYPICAL APPLICATIONS INCLUDE
• Lighting and LED applications
• Low strain is required for fragile component leads
• Computer and peripherals
• Telecommunications
• Between any heat-generating semiconductor and a heat sink
CONFIGURATIONS AVAILABLE
• Sheet form and die-cut parts
PDS_GP_1450_0813
FEATURES AND BENEFITS
• Thermal Conductivity: 1.3 W/m-K
(Bulk Rubber)
• PEN lm reinforcement allows easy
rework and resistance to puncture and
tear resistance
• Highly conformable/low hardness
• Low strain on fragile components
PRODUCT DESCRIPTION
Highly Conformable,Thermally Conductive,
Reworkable Gap Filling Material
August 2013
PROPERTY IMPERIAL VA LUE METRIC VA LUE TEST METHOD
Color Light Pink Light Pink Visual
Reinforcement Carrier PEN film PEN film —
Thickness (inch) / (mm) 0.020 to 0.125 0.508 to 3.175 ASTM D374
Inherent Surface Ta ck (1 side) 1 1 —
Density (Bulk Rubber) (g/cc) 1.8 1.8 ASTM D792
Heat Capacity (J/g-K) 1.0 1.0 ASTM E1269
Hardness (BulkRubber) (Shore 00) (1) 30 30 ASTM D2240
Yo ung's Modulus (psi) / (kPa) (2) 16 110 ASTM D575
Continuous Use Temp (°F) / (°C) -76 to 302 -60 to 150 —
ELECTRICAL
Dielectric Breakdown Voltage (Vac) >6000 >6000 ASTM D149
Dielectric Constant (1000 Hz) 5.0 5.0 ASTM D150
Volume Resistivity (Ohm-meter) 10
9
10
9
ASTM D257
Flame Rating V-0 V- 0 U.L. 94
THERMAL
Thermal Conductivity (W/m-K) 1.3 1.3 ASTM D5470
1) Thirty second delay value Shore 00 hardness scale.
2)Young’s Modulus, calculated using 0.01 in/min.step rate of strain with a sample size of 0.79 inch
2
.
TYPICAL PROPERTIES OF GAP PAD 1450
For the most direct access to local sales and technical support visit: www.bergquistcompany.com
Americas
+1.800.347.4572
Europe
+31.35.5380684
Asia
+852.2690.9296
TDS Gap Pad
®
1450, August 2013
Disclaimer
Note:
The information provided in this Technical Data Sheet (TDS) including the
recommendations for use and application of the product are based on our
k n o w l e d g e a n d ex p e r i e n c e of t h e pr o d u c t as at t h e da t e o f t h i s T D S . Th e p r o d u c t
can have a variety of different applications as well as differing application and
working conditions in your environment that are beyond our control. Henkel is,
t h e r e f o r e , no t l i a b l e f o r t h e su i t a b i l i t y o f o u r p r o d u c t fo r t h e p r o d u c t i o n p r o c e s s e s
and conditions in respect of which you use them, as well as the intended
applications and results. We strongly recommend that you carry out your own
prior trials to conrm such suitability of our product.
Any liability in respect of the information in the Technical Data Sheet or any other
w r i t t e n o r o r a l r e c o m m e n d a t i o n ( s) r e g a r d i n g t h e c o n c e r n e d p r o d u c t i s e x c l u d e d ,
except if otherwise explicitly agreed and except in relation to death or personal
injury caused by our negligence and any liability under any applicable mandatory
product liability law.
In case products are delivered by Henkel Belgium NV, Henkel Electronic
Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and
Henkel France SA please additionally note the following:
In c ase H enke l woul d be n ever th ele ss he ld li abl e, on w hat ever le ga l grou nd,
He nke l’s li ab ili t y wi ll in n o even t exce ed t he a mo un t of t he c onc er n ed d eli very.
In case products are delivered by Henkel Colombiana, S.A.S. the following
disclaimer is applicable:
The information provided in this Technical Data Sheet (TDS) including the
recommendations for use and application of the product are based on our
knowledge and experience of the product as at the date of this TDS. Henkel is,
t h e r e f o r e , no t l i a b l e f o r t h e su i t a b i l i t y o f o u r p r o d u c t fo r t h e p r o d u c t i o n p r o c e s s e s
and conditions in respect of which you use them, as well as the intended
applications and results. We strongly recommend that you carry out your own
prior trials to conrm such suitability of our product.
Any liability in respect of the information in the Technical Data Sheet or any other
w r i t t e n o r o r a l r e c o m m e n d a t i o n ( s) r e g a r d i n g t h e c o n c e r n e d p r o d u c t i s e x c l u d e d ,
except if otherwise explicitly agreed and except in relation to death or personal
injury caused by our negligence and any liability under any applicable mandatory
product liability law.
In case products are delivered by Henkel Corporation, Resin Technology
Group, Inc., or Henkel Canada Corporation, the following disclaimer is
applicable:
The data contained herein are furnished for information only and are believed to
be reliable. We cannot assume responsibility for the results obtained by others
over whose methods we have no control. It is the user’s responsibility to
d e t e r m i n e s u i t a b i l i t y f o r t h e u s e r ’ s p u r p o s e o f a n y p r o d u c t i o n m e t h o d s m e n t i o n e d
herein and to adopt such precautions as may be advisable for the protection of
property and of persons against any hazards that may be involved in the handling
and use thereof. In light of the foregoing, Henkel Corporation specically
disclaims all warranties expressed or implied, including warranties of
m e r c h a n t a b i l i t y o r t n e s s f o r a p a r t i c u l a r p u r p o s e , a r i s i n g f r o m s a l e o r u s e
of Henkel Corporation’s products. Henkel Corporation specically
disclaims any liability for consequential or incidental damages of any kind,
including lost prots. The discussion herein of various processes or
compositions is not to be interpreted as representation that they are free from
domination of patents owned by others or as a license under any Henkel
Corporation patents that may cover such processes or compositions. We
recommend that each prospective user test his proposed application before
repetitive use, using this data as a guide. This product may be covered by one or
more United States or foreign patents or patent applications.
Trademark usage
Except as otherwise noted, all trademarks in this document are trademarks of
Henkel Corporation in the U.S. and elsewhere. ® denotes a trademark
registered in the U.S. Patent and Trademark Ofce
Reference 0.1