Ømin = 16 / Ømax = 20
Thickness max. 30
Nut (included, wrench width 46mm ),
torque with min. 1Nm
Keep away from high voltage lines.
Be careful when working at height!
Always secure ladders!
Always tighten screws!
The antenna must be secured in a proper manner to ensure that the antenna stays
in a stable position during its whole life cycle.
• A large nut is supplied to share the antenna weight upon a large surface, which will avoid damaging the mounting surface.
If necessary the mounting surface should be reinforced.
Dimensions in millimeters [mm]
Antenna designed for indoor use
HUBER+SUHNER
SENCITY
OPTIMA ANTENNA
FOR WIRELESS COMMUNICATION
Mounting Instruction
Page 1 of 2
Mounting options:
False ceiling single hole mounting
(Nut included in antenna package)
HUBER+SUHNER AG
RF Technology
9100 Herisau, Switzerland
Phone +41 (0)71 353 41 11
Fax +41 (0)71 353 47 51
www.hubersuhner.com
Doc. No. 0000682958
Art. No. 92019016
Revision C
Page 2 of 2
WAIVER!
It is exclusively in written agreements that we provide our customers with warrants
and representations as to the technical contained specifications and/or the fitness
for any particular purpose. The facts and figures herein are carefully compiled to
the best of our knowledge, but they are intended for general informational
purposes only.
HUBER+SUHNER is certified according to ISO 9001 and ISO 14001
HUBER+SUHNER – Excellence in Connectivity Solutions
General information:
Minimum of static bending radius of the cable is 19.05 mm.
The antenna can be oriented in the direction of the arrow (main energy f > 1.7 GHz)