Minimum Bend Radius, loaded
Minimum Bend Radius, unloaded
Tensile Load, long term, maximum
Tensile Load, short term, maximum
Environmental Specifications
-
30 °C to +70 °C (
-
22 °F to +158 °F)
-
30 °C to +70 °C (
-
22 °F to +158 °F)
-
30 °C to +75 °C (
-
22 °F to +167 °F)
Mechanical Test Specifications
FOTP
-
104 | IEC 60794
-
1 E6
See long and short term tensile loads
Water Penentration Test Method
Environmental Test Specifications
FOTP
-
98 | IEC 60794
-
1 F15
FOTP
-
81 | IEC 60794
-
1 E14
-
30 °C to +85 °C (
-
22 °F to +185 °F)
-
30 °C to +60 °C (
-
22 °F to +140 °F)
Low High Bend Test Method
FOTP
-
37 | IEC 60794
-
1 E11
-
30 °C to +70 °C (
-
22 °F to +158 °F)
Temperature Cycle Test Method
Regulatory Compliance/Certifications
Product SpecificationsProduct Specifications
810008925/DB|B810008925/DB|B
--
024024
--
LNLN
--
8W8W
--
F12NS/16GF12NS/16G
©©2018CommScope, Inc. All rights reserved. All trademarks identified by 2018CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 22, 2018All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: February 22, 2018
page 2 of 3page 2 of 3
May 15, 2018May 15, 2018