SENSITRON________ _
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 5434, REV. A.1
©2017 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
(631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com
SDA1006
SDA1006S
SDA1006SS
Diode Array
Devices are serialized
Eight 1N5615 diodes in surface mount package
Die manufactured on qualified JANS line
Built and screened to space level quality (SDA1006SS)
Quality Conformance Inspection (QCI) in accordance with MIL-PRF-38534 is performed
on each lot (SDA1006SS)
Add suffix “S” for screening per MIL-PRF-38534, Class H (SDA1006S)
Add suffix “SS” for Space Level Screening per MIL-PRF-38534, Class K (SDA1006SS)
MAX. RATINGS / ELECTRICAL CHARACTERISTICS FOR EACH DIODE
All rating at are T
A
= 25
O
C unless otherwise specified
RATING
SYMBOL
MAX
UNIT
Peak Inverse Voltage (DC)
PIV
200
V
Average DC Output Current Per Diode
T
A
= 55
o
C
T
A
= 100
o
C
I
O
1
0.75
A
Peak Single Cycle Surge Current
(1)
(T
P
=8.3ms single half-Sine wave)
I
FSM
10
A
Steady State Power Dissipation per
Package
(2)
P
T
1000
mW
Max. Operating Junction Temperature
T
J
-55 to +150
o
C
Max. Operating Ambient Temperature
T
OP
-30 to 100
o
C
Storage Temperature Range
T
STG
-65 to +175
o
C
Maximum forward voltage @ 3.0A
Tp = 300µs; 2% duty cycle
V
f
1.6
V
Maximum Instantaneous Reverse
Current At Rated (PIV)
T
A
= 25
o
C
T
A
= 100
o
C
0.5
25
A
Max. Reverse Recovery Time
I
F
=0.5 A, I
R
= 1.0A, I
RR
=0.25A
t
rr
150
ns
Max. Capacitance
f= 1MHz, V
R
= 12V
C
T
45
pF
Thermal Resistance Junction to Case
JC
21
o
C/W
Note: (1) Each diode
(2) Derate at 8mW/
0
C above 25
0
C
SENSITRON________ _
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 5434, REV. A.1
©2017 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
(631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com
SDA1006
SDA1006S
SDA1006SS
Mechanical Outline Electrical Schematic
PART ORDERING INFORMATION
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
Part Number
Screened In Accordance to:
SDA1006
-
SDA1006S
MIL-PRF-38534, Class H
SDA1006SS
MIL-PRF-38534, Class K