SENSITRON ______
SEMICONDUCTOR
©2010 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com sales@sensitron.com
SCP-5282-1
SCP-5282-1U
TECHNICAL DATA
PART NUMBER SCP-5282-1, REV. -
High Pulse Power Mil-STD-1275 Transorb
Application:
+28V DC systems
Protection Level:
MIL-STD-1275 testing; 100V Surge withstanding with 0.5-ohm source impedance
100% tested at 100A peak current, single 80-msec square current pulse
60% higher power rated compared to industry standard offerings
Key Features:
Allows the use of 50V high efficiency FET
Increase system reliability through eliminating avalanche FET operation
Clamping below 55V DC for both 100V and 250V pulse
High pulse power capability
Non-hermetic version, with threaded terminals
Part Ordering Information:
SCP-5282-1: bi-directional
SCP-5282-1U: uni-directional
Rating
Condition
Symbol
Min
Max
Units
Peak Pulse Power Dissipation
@ 25
0
C, 1ms
P
pk
-
60
KW
Steady State Power Dissipation
@ 25
0
C
P
-
40
Watts
Reverse Stand-Off Voltage
-
V
WM
-
33
Volts
Reverse Leakage
@ V
WM
I
D
-
25
A
Breakdown Voltage
@ 10 mA
V
(BR)
36.7
-
Volts
Clamping Voltage
@ I
PP
V
c
-
49
Volts
Peak Pulse Current
-
I
PP
100
Amps
T
clamping
0 Volts to V
(BR)
-
1x 10
–8
Seconds
Operating & Storage Temp.
-
Top& Tstg
-55
+ 150
0
C
SENSITRON ______
SEMICONDUCTOR
©2010 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com sales@sensitron.com
SCP-5282-1
SCP-5282-1U
TECHNICAL DATA
PART NUMBER SCP-5282-1, REV. -
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.