LISA-U200-61S firmware change PCN – Product Change Notification
UBX- 14001034 Page 1 of 2
locate, communicate, accelerate
PCN – Product Change Notification
Topic:
LISA-U200-61S firmware change
UBX- 14001034
Author:
este
Date:
7
th
February 2014
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. © 2012 u-blox ag.
1 Affected Products
Product Name
Order Number
Type No (Old)
Remarks
LISA-U200
LISA-U200-61S
LISA-U200-61S-01
2 Type of Change
[ ] Hardware modification
[ x ] Firmware update
[ ] Others, __________________________________________________________
3 Description of Change
A new firmware version has been released to provide full solution to the problem detected by customer. The
problem is described in document [6].
The new firmware number is 22.42. The firmware version can be polled from the module by sending an
AT+GMR command. See AT commands manual [1] for details.
Module hardware remains unchanged.
Firmware 22.42 is fully tested and passed all the release tests in u-blox.
4 Schedule
Samples:
Available upon request
Estimated First Shipment Date
:
February 10
th
2014
Estimated Transition Date
:
To be agreed with the customer
Documentation:
28
th
February 2014
5 Customer Impact and Recommended Action
Customer will test firmware 22.42 in his laboratories.
The Transition date will be set in agreement with the customer.
6 Reference Documents
[1]. u-blox AT Commands Manual Document UBX-13002752, Revision R21
[2]. LISA-U2 series Data Sheet Document UBX-13001734, Revision R13
[3]. LISA-U series System Integration Manual document UBX-13001118, Revision R17
[4]. LISA-U200-61S Information Note Initial Production (UBX-TN-13019)
[5]. 8D report for RMA 3398, u-blox document Q-8DW-13020
[6]. PCN for LISA-U200-61S-00, u-blox document UBX-13005435
LISA-U200-61S firmware change PCN – Product Change Notification
UBX- 14001034 Page 2 of 2
locate, communicate, accelerate
A Description of changes
Fix of the bug in the recovery process which caused the file-system driver to go into endless loop. This
fix allows the module to correct any inconsistency that may happen during removal of power.
[u-blox tracking number15482].
Limitations described in document [6], Annex B are removed.