SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Internal ConneCtors
116
Y-loCk PullforCe ConneCtor and Cable sYstem - IntroduCtIon
serIes Y-lPf
funCtIonalItY of loCkIng meChanIsm:
Lock mechanism by use of small hooks at the board connector
The hooks lock the FFC/FPC behind the supporting tape
Use of standard FFC/FPC under compliance with tolerances:
- Supporting Tape: 4.5mm +/- 0.5mm (0.5mm pitch)
4.5mm +/- 0.8mm (1.0mm pitch)
- Stripped length: 3.0mm +/- 0.5mm
IntroduCtIon
Developments of new products in the current market situation require good performance and use of the
technical complexity and space available, especially when it comes down to efficiency!
Efficiency means the achievement of a full range of functions on the smallest of available space.
With our Y-Lock
®
Pullforce connector system we realise these requirements.
Because Y-Lock
®
Pullforce fulfills the need for a smart technology, space-saving design and the reduction
of handling costs in different areas
aPPlICatIons:
Due to the special design features the Y-Lock Pullforce
fulfils the highest requirements and can be used in
applications which have a need for very high demands.
Locking mechanism without
the stiffener using small hooks
FFC/FPC
• Automotive systems
• Lightning systems
• Industrial Process Systems
• Medical equipments
advantages:
New design for an easy, quick and secure
assembly for a Board-to-cable solution
“One-push lock” system
• Pitches: 0.5 and 1.0mm
• 90° and 180° versions
• Various pin counts available
• Non-ZIF system
• Automatic assembly is possible
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Internal ConneCtors
117
1)
Other Pin counts available on request
sPeCIFICatIons
Insulation Resistance: 1,000M min. at 100V DC
Withstanding Voltage: 250V ACrms for 1 minute
Contact Resistance: 30m max. at 10mA
Current Rating: 0.5A
Voltage Rating: 50V DC
Operating Temp. Range: –40°C to +105°C
Mating Cycles: 10 times minimum
MaterIals and FInIsH
Housing: LCP
Contacts: Phosphor Bronze
Plating: Au Flash or Tin
Features
• non-ZIF connector
• Can be used with standard FFC/FPC
• One push lock system
PCB layout
outlIne dIMensIons
y-loCk PullForCe ConneCtor 180° (0.50MM PItCH ) sMt
serIes y-lPF
Part nuMBer
Series No.
Connector
Pitch: 5 = 0.50mm
Pin Count: 30 (only)
1)
Terminal Style: S = SMT
Orientation: 1 = 180° 9 = 90°
Plating: Mating / Termination Area
BF = 0.3µm Au / Flash Au
Tape and Reel (180° version with Pick & Place Cap)
For matching cable see page 120
y-lPF - C 5 - 30 - s * - BF - r
AUTOMOTIVE
COMPLIANT
Internal ConneCtors – y-loCk PullForCe (non-zIF)