The information contained in this Data Sheet is intended to assist you in designing with Rogers’ High Performance Foam Materials. It
is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a
particular purpose or that the results shown on the Data Sheet will be achieved by a user for a particular purpose. The user should
determine the suitability of Rog ers’ High Performance F oam Materials for each application. The Rogers logo, Th e world runs better
with Rogers. and BISCO are licensed trademarks of Rogers Corporation. © 2002, 2003, 2004, 2008 Rogers Corporation, All rights
reserved. Printed in U.S.A., 8101-1008-PDF, Publication #180-092
Page 1 of 2
High Performance Foams Division • Carol Stream, IL , USA • T: 607.786.8112 • F: 607.786.8120 • www.rogerscorp.com
BISCO
®
HT-6135 is a cream colored, solid
silicone, 35 durometer Shore A ma terial
offered with tight width a nd th ickness
tolerances. This unique product is designed
to enable the materia l to solve many
design sealing issues within various industrial
and handheld device markets. BISCO
HT-6135 material is available in various
thicknesses and manufactured in roll form
to allow fabricators to e asily convert the
material to the proper dimensions.
Features and Benefits
Superior long term performance and
durability
Tight thickness tolerances for greater
design reliability
Wide temperature range for increased
functionality under varying
environment a l conditions
Applications
Industrial machinery
Handheld device gaskets
BISCO
®
HT-6135 TIGHT TOLERANCE SOLID SILICONE
Silicone HT-6135 – Typical Physical Properties
At 1/16” (1.59mm) thick
Property Test Method Typical Value
Thickness
0.010” (0.25 mm)
0.020” (0.50 mm)
0.031” (0.79 mm)
0.063” (1.59 mm)
Durometer, Pts ASTM D 2240 35
Tensile, psi ASTM D 412 800
Elongation, % ASTM D 412 450
Tear Resistance, ppi ASTM D 624 70
Compression Set, %
(70 hrs @ 300°F, 25%
compression)
ASTM D 395 15
Temperature
Continuous
SAE J-2236
-80° to 425°F
(-62° to 218°C)
Color Cream
Material Options
Material is available with an acrylic or silicone
pressure sensitive adhesive applied at greater than
0.031” (0.79mm) thickness
High Performance Foams Division
www.rogerscorp.com
Data Sheet
The information contained in this Data Sheet is intended to assist you in designing with Rogers’ High Performance Foam Materials. It
is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a
particular purpose or that the results shown on the Data Sheet will be achieved by a user for a particular purpose. The user should
determine the suitability of Rog ers’ High Performance F oam Materials for each application. The Rogers logo, Th e world runs better
with Rogers. and BISCO are licensed trademarks of Rogers Corporation. © 2002, 2003, 2004, 2008 Rogers Corporation, All rights
reserved. Printed in U.S.A., 8101-1008-PDF, Publication #180-092
Page 2 of 2
High Performance Foams Division • Carol Stream, IL , USA • T: 607.786.8112 • F: 607.786.8120 • www.rogerscorp.com
Standard Thickness Tolerance Width Tolerance
Notes:
1. All metric conversions are approxi m ate.
2. Additional technical information is available.
3. Typical values are a representation of an average value for the populati on of the prope r ty. For specification
values contact Rogers Corporation.
Nominal Width
(Inches)
Tolerance
(Inches)
0 < T ≤ 3
± 0.063
3 < T ≤ 8
± 0.094
8 < T ≤ 12
± 0.125
12 < T ≤ 18
± 0.188
18 < T ≤ 26
± 0.219
26 < T ≤ 36
± 0.250
>36 ± 0.313
Standard
Thickness
(Inches)
Tolerance
(Inches)
≤ 0.014
± 0.002
0.015 – 0. 025 +0.003, -0.002
0.026 – 0.040 ± 0.004
0.041 – 0. 094 ± 0.006
0.095 – 0.145 ± 0.008