Mixer
800 MHz
F1-800
MHz
Lowpass
Filter
F1 Freq
Mixer
divide
by N
SPDT
switch
200 MHz
150 MHz
5 MHz
Phase
detector
Loop
Filter
Coupler
VCO1
VCO2
VCO3
Amp
Note:
Only 1 of the 3
VCOs are active
depending on the
channel selected.
Modulation
Dierential
line driver
J1-22
Biphase
Modulator
Amp
Bandpass
Filter
F1
J3
Amp
Amp
Mixer
F1
F1+200 MHz
200 MHz
800 MHz
400 MHz
200 MHz
Amp
Filter
195 MHz
Phase
Detector
Loop
Filter
Divide
by 2
5 MHz
10 MHz
Frequency
Standard
100 MHz
VCXO
Coupler
X2
Multiplier
Divide
by 2
Divide
by 10
X3
Multiplier
J1 pins 8 and 20
5 MHz
Dierential TTL
Amp Filter
5 MHz
50 MHz
150 MHz
Mixer
F0
J2
F2
J4
5 MHz sine
J5
200 MHz
F1-800-200 or F1-800-150
Coupler
Dierential
line driver
X2
Multiplier
X2
Multiplier
Bandpass
Filter
Frequency Multiplier
Oscillator (FMO)
SPECTRUM MICROWAVE
CERTIFIED
www.SpectrumMicrowave.com
SPECTRUM MICROWAVE 2707 Black Lake Place Philadelphia, PA 19154 Phone: (215) 464-4000 • Fax: (215) 464-4001
The Frequency Multiplier Oscillator (FMO) is a compact
21-channel synthesized signal generator that provides
transmit and LO signals for L-band and S-Band airborne
radar systems. This design incorporates a unique isolation
system for exceptional phase noise performance during
vibration.
Typical Performance Characteristics
21 Transmit channels
21 rst LO channels
195 MHz xed second LO
5 MHz xed third LO
5 MHz dierential TTL processors clock
All signals are coherent to an internal reference
Frequency accuracy ± 0.3 PPM after an 8-minute warm-up
Residual FM noise measured 100%
Biphase modulation on transmit and rst LO
Output Power 27 dBm min
Output Frequency “L through “S” Band
Frequency Switching Time <50 ms
This rugged design has successfully passed environmental
qualication for Temperature-Altitude, Humidity, Salt Fog,
Vibration, Acoustical Noise, and Shock Testing. Interested
parties should contact the factory directly for exact levels
and conditions used for environmental test.