SDAWIR01/02 Demonstration Kit User Manual

for the HS3001, FS2012, and ZWIR4512

January 24, 2018

Description

The SensorShare™ SDAWIR01 and SDAWIR02 Demonstration

Kits demonstrate using the IDT ZWIR4512 6LoWPAN Low-Power

Wireless Module to communicate humidity, temperature, and flow

sensor measurement data to a WiFi hub that allows a linked

device to display and graph the measured data in real time. The

kit uses the IDT HS3001 Humidity and Temperature Sensor and

FS2012 Flow Sensor for the measurements.

The sensors are mounted in a 5cm clear plastic cube that

contains a ZWIR4512 Wireless Module to communicate with the

hub.

The 6LoWPAN-WiFi Hub and the Sensor Cube are powered by a

separate AC/DC wall mount adapter.

The Hub utilizes a Raspberry PI Zero W to provide the WiFi hub

function interfaced to the ZWIR4512 Wireless Module. The Hub

uses Raspbian LXDE Lightweight Desktop Environment.

Raspbian is a Debian-based computer operating system for the

Raspberry Pi. The Hub micro-SD card is fully loaded and ready

for operation.

Kit Contents

 6LoWPAN-WiFi Hub operating with a Raspberry PI Zero W

 Sensor Cube

 HS3001 Humidity Sensor

 FS2012 Flow Sensor

 ZWIR4512 6LoWPAN RF Module

 Hose; USB and HDMI adapters

 2 AC/DC Wall-Mount Adapters depending on kit part code:

 SDAWIR01 includes North American adapters

 SDAWIR02 includes adapters for other locations

Features

 HS3001 Humidity and Temperature Sensor with I2C interface

in the Sensor Cube

 RH accuracy: ±1.5% RH typical (10% to 90% RH, 25C)

 Fast RH response time (typical: 6 seconds)

 Temperature sensor accuracy: ±0.2°C (typical)

(-10°C to +80°C)

 FS2012 Flow Sensor with I2C interface in the Sensor Cube

 Gas or liquid mediums

 Robust solid isolation technology

 Resistant to surface contamination

 No cavity to cause clogging

 Resistant to vibration and pressure shock

 License-free 868/915 MHz frequency bands

 Unique EUI64 address

 4 channels in EU mode; 10 channels in US mode

 Over-the-air update functionality in the Hub and Sensor Cube

 No software to install; apply power and WiFi link to the Hub to

view measurements

 Multiple cubes with sensors installed can communicate with

the Hub and have results displayed

 The Hub and Sensor Cube operate from 5.0V DC and micro-

USB connector; wall-mount power supply adapters included

 The SDAWIR02 kit wall mount adapter has the common AC

mains connection plugs used worldwide.

 For further details, see the datasheets for the IDT products

used in this demonstration kit, which are located on-line:

 ZWIR4512: www.idt.com/ZWIR4512

 FS2012: www.idt.com/FS2012

 HS3001: www.idt.com/HS3001

SDAWIR01 Demonstration Kit

SDAWIR01/02 Demonstration Kit User Manual for the HS3001, FS2012, and ZWIR4512

January 24, 2018

Important Notes

Disclaimer

Integrated Device Technology, Inc. and its affiliated companies (herein referred to as “IDT”) shall not be liable for any damages arising out of defects resulting

from

(i) delivered hardware or software

(ii) non-observance of instructions contained in this manual and in any other documentation provided to user, or

(iii) misuse, abuse, use under abnormal conditions, or alteration by anyone other than IDT.

TO THE EXTENT PERMITTED BY LAW, IDT HEREBY EXPRESSLY DISCLAIMS AND USER EXPRESSLY WAIVES ANY AND ALL WARRANTIES,

WHETHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND OF

FITNESS FOR A PARTICULAR PURPOSE, STATUTORY WARRANTY OF NON-INFRINGEMENT, AND ANY OTHER WARRANTY THAT MAY ARISE BY

REASON OF USAGE OF TRADE, CUSTOM, OR COURSE OF DEALING.

Restrictions in Use

IDT’s SDAWIR01/SDAWIR02 Demonstration Kit consisting of the 6LoWPAN-WiFi Hub, Sensor Cube(s), AC/DC Wall Mount Adapters, Hose; USB and HDMI

adapters and the IDT Demo Software are designed to provide a quick setup for taking Flow, RH% and temperature measurements with the FS2012 and HS3001

only. IDT’s SDAWIR01/SDAWIR02 Demonstration Kits and IDT Demo Software must not be used for any mission-critical applications, end-customer products, or

measurement reference source.

Contents

1. Setup ............................................................................................................................................................................................................4

1.1 Computer Requirements ....................................................................................................................................................................4

1.2 Kit Connections and Power Switch ....................................................................................................................................................4

1.3 Kit Power-On and Operation ..............................................................................................................................................................5

1.4 Kit Power Off ......................................................................................................................................................................................6

1.5 Setting the Wireless Frequency Band for the ZWIR4512 ..................................................................................................................6

1.6 Altering the Cube Function and Performing a Reset ..........................................................................................................................6

1.7 Operating with Only the HS3001 Sensor or Only the FS2012 Sensor ...............................................................................................7

2. Usage Guide .................................................................................................................................................................................................7

2.1 The Browser Display ..........................................................................................................................................................................7

2.2 The Browser Registration Display ......................................................................................................................................................7

2.3 The Measurement Control Menu .......................................................................................................................................................8

3. Hub and Cube Firmware Update ..................................................................................................................................................................9

4. Ordering Information .....................................................................................................................................................................................9

5. Revision History ..........................................................................................................................................................................................10