810008925/DB810008925/DB
||
BB
--
024024
--LNLN--8W8W--F12NS/16GF12NS/16G
LightScope ZWP® Blown Micro Single Jacket All-Dielectric Outdoor Stranded Loose Tube Arid-Core®
Construction Cable
Product Classification
Portfolio
CommScope®
Product Type
Fiber OSP cable
Regional Availability
Asia | Australia/New Zealand | EMEA | Latin America | North America
Standards And Qualifications
Cable Qualification Standards
IEC 60794
-
5
-
10
Representative Image
General Specifications
Cable Type
Stranded loose tube
Construction Type
Non
-
armored
Subunit Type
Gel
-
filled
Construction Materials
Fiber Type Solution
LightScope® ZWP®
,
zero water peak singlemode fiber (G.652.D, G.657.A1)
Jacket Material
High density polyethylene (HDPE)
Total Fiber Count
24
Fiber Type
LightScope® ZWP®
,
zero water peak singlemode fiber (G.652.D, G.657.A1)
Fiber Type, quantity
24
Fibers per Subunit, quantity
12
Jacket Color
Black
Jacket UV Resistance
UV stabilized
Dimensions
Buffer Tube/Subunit Diameter
1.60 mm | 0.06 in
Cable Weight
20.0 kg/km | 14.0 lb/kft
Product SpecificationsProduct Specifications
©©2018CommScope, Inc. All rights reserved. All trademarks identified by 2018CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: December 13, All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: December 13,
20172017
page 1 of 3page 1 of 3
January 29, 2018January 29, 2018
Diameter Over Jacket
5.50 mm | 0.22 in
Filler, quantity
3
Subunit, quantity
2
Physical Specifications
Minimum Bend Radius, loaded
8.2 cm | 3.2 in
Minimum Bend Radius, unloaded
5.5 cm | 2.2 in
Tensile Load, long term, maximum
97 N | 22 lbf
Tensile Load, short term, maximum
324 N | 73 lbf
Vertical Rise, maximum
492.0 m | 1614.2 ft
Environmental Specifications
Environmental Space
Air
-
blown, microduct
Installation Temperature
-
30 °C to +70 °C (
-
22 °F to +158 °F)
Operating Temperature
-
30 °C to +70 °C (
-
22 °F to +158 °F)
Storage Temperature
-
30 °C to +75 °C (
-
22 °F to +167 °F)
Mechanical Test Specifications
Compression
10 N/mm
Compression Test Method
FOTP
-
41 | IEC 60794
-
1 E3
Flex
25 cycles
Flex Test Method
FOTP
-
104 | IEC 60794
-
1 E6
Impact
0.30 N
-
m | 0.22 ft lb
Impact Test Method
FOTP
-
25 | IEC 60794
-
1 E4
Strain
See long and short term tensile loads
Strain Test Method
FOTP
-
33 | IEC 60794
-
1 E1
Twist
10 cycles
Twist Test Method
FOTP
-
85 | IEC 60794
-
1 E7
Water Penentration
24 h
Water Penentration Test Method
FOTP
-
82 | IEC 60794
-
1 F5
Environmental Test Specifications
Cable Freeze
-
2 °C | 28 °F
Cable Freeze Test Method
FOTP
-
98 | IEC 60794
-
1 F15
Drip
70 °C | 158 °F
Drip Test Method
FOTP
-
81 | IEC 60794
-
1 E14
Heat Age
-
30 °C to +85 °C (
-
22 °F to +185 °F)
Heat Age Test Method
IEC 60794
-
1 F9
Low High Bend
-
30 °C to +60 °C (
-
22 °F to +140 °F)
Low High Bend Test Method
FOTP
-
37 | IEC 60794
-
1 E11
Temperature Cycle
-
30 °C to +70 °C (
-
22 °F to +158 °F)
Temperature Cycle Test Method
FOTP
-
3 | IEC 60794
-
1 F1
Regulatory Compliance/Certifications
Agency
Classification
RoHS 2011/65/EU
Compliant
ISO 9001:2008
Designed, manufactured and/or distributed under this quality management system
Product SpecificationsProduct Specifications
810008925/DB|B810008925/DB|B
--
024024
--
LNLN
--
8W8W
--
F12NS/16GF12NS/16G
©©2018CommScope, Inc. All rights reserved. All trademarks identified by 2018CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: December 13, All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: December 13,
20172017
page 2 of 3page 2 of 3
January 29, 2018January 29, 2018