BF14U2-7512
THIS COPYRIGHTED DOCUMENT IS THE PROPERT Y OF GLENAIR, IN C. AND IS FUR NISHED ON THE CONDITION THAT IT IS NOT TO
BE DISCLOSED, REPRO DUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QU OTATIO NS FROM COMPET ITIVE SOU RCES, OR USED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEER ING EVAL UATION AND INCORPORATION
INTO TECHNICAL SPECIFICATIO NS AND OTHE R DOCUMENTS WH ICH SPEC IFY PROCUREMENT OF PRODUCTS FROM GLENA IR, INC.
050-206
PRODUCT BRIEF
Dual-DVI Copper to Fiber Media Conver ter,
28VDC
D38999 (ARINC801 for Fiber Optic),
D38999 (Quadrax & Pin cont acts for Signal a nd Servic e P ort),
D38999 (Pin contacts for Power)
REV
DESCRIPTION
DATE
APPROVED
A
Released
11/7/2016
MT/MF/GC
B
Corrected color assi gnm ent of TMDS channel 1 and 2 on J1 Pinout Table DCN#: 62709
11/14/2016
MT/AP
©2016 Glenair, Inc. REV: B US Cage Code 06324 Printed in USA
GLEN AIR, I NC. ∙ 1211 AIR WAY ∙ GLEND ALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912
www.glenair.com PAGE 2 of 12 E-mail: sales@glenair.com
050-206 PRODUCT BRIEF
Dual-DVI Copper to Fi ber Media Converter
D38999 (Signal, BIT), D38999 (Power), D38999 (Fiber Optic)
Dual-DVI Copper to Fiber Medi a Conve rter
The Glenair 050-206 Dual - Digital Visual Interface (DVI) Copper to Fiber Optic
Media Converter increases DVI operational link distance in harsh environments. It
allows both longer distance and more reliable communication on optical fibers in
ruggedized systems using DVI protocol between graphics cards and remote
displays. This media converter is configured as either transmitter, converting
electrical DVI signals to fiber, or as a receiver, converting fiber optic signals into
the electrical DVI signals. The media converter incorporates a power supply which
has been designed to accept a wide DC input voltage range, 18V to 36V. The 050-
206 is designed for harsh environments and incorporates electronics in an
environmentally sealed enclosure that incorporates three environmental D38999
connectors. Signal I/O and BIT functionality is supplied through one D38999
connector and power is provide through its own dedicated D38999 connector. The
Fiber Optics passes through D38999 using ARINC 801 contact which can be
configured to support either single mode or multi-mode fiber applications.
1310nm FP Lasers for SMF 10km links
InGaAs PIN PD for SMF 10km links
850nm Lasers for MMF up to 500m links
GaAs PIN PD for MMF up to 500m Links
Wide Input Voltage Range: 18-36V
IP67 in mated condition
D38999 with Quadrax and #22 Pin contacts for
Signal and BIT I/O
D38999 with #22 Pin contacts for Power
D38999 ARINC 801 for Fiber Optic I/O
OPTIONAL FEATURES
Built In Test Conso le Port ac c es sible via USB2.0
Built in Test Conso le Port accessible via UART
(RS422)
APPLICATIONS
• Harsh Environment such as: Airborne, Tactical,
Railway, Industrial, Oil and Gas and Shipboard
applications
• DVI EDID and hot-plug detection are not supported