BF14U2-6875
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION
INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
050-117
PRODUCT BRIEF
Line Replaceable Unit (LRU) Copper to Fiber Media Converter,
Single or Dual Channel, Flange Mount
10/100/1000BASE-T to Fiber Optic Ethernet
(1000BASE-SX, 1000 BASE-LX10 or 100BASE-FX) 28VDC (DO-160
Audio Conducted Susceptibility Cat Z),
Lightning Strike (DO-160 level 3 waveform 3/3)
M38999 (ARINC801), M38999 (Quadrax), M38999 (Power)
REV
DESCRIPTION
DATE
APPROVED
19
Preliminary
01/07/2016
MF
20
Add ECCN
05/24/2016
RAS
21
Add new part number to have two different fiber channels
09/29/2016
GC
22
Corrected J1 Mating plot
12/08/2016
TC
23
Add Flow Control Option
03/31/2017
RAS/GC
24
Update Copyright date
05/26/2017
GC
©2014 Glenair, Inc. REV: 24 US Cage Code 06324 Printed in USA
GLENAIR, INC. ∙ 1211 AIR WAY ∙ GLENDALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912
www.glenair.com PAGE 2 of 15 E-mail: sales@glenair.com
050-117 PRODUCT BRIEF
Line Replaceable Unit (LRU) Media Converter, Flange Mount
10/100/1000BASE-T to Fiber Optic Ethernet (SX, LX10 or FX)
10/100/1000BASE-T to 1000BASE-SX or 1000BASE-LX10
The Glenair 050-117 Flange Mount Copper to Fiber Media Converter can be
configured as either Single Channel or Dual Channel and can convert
10/100/1000BASE-T to 1000BASE-SX, 1000BASE-LX or 100BASE-FX protocols.
It is designed for harsh environments and incorporates electronics in an
environmentally sealed enclosure that incorporates three environmental M38999
connectors. The power supply is designed to accept a wide DC input voltage
range, 18V to 36V and dirty 28V power as defined in DO-160. Power is supplied
through a 38999 with standard #22D contacts. Signal I/O passes through a 38999
with a combination of Quadrax and #22D contacts and Fiber Optics passes
through a 38999 using ARINC 801 contacts which can be configured to support
either single mode or multi-mode fiber applications.
KEY FEATURES/BENEFITS
1310nm FP Lasers for 1000BASE-LX10
InGaAs PIN PD for 1000BASE-LX10
850nm Lasers for 1000BASE-SX
GaAs PIN PD for 1000BASE-SX
1300nm LED for 100BASE-FX
PIN PD for100BASE-FX
Wide Input Voltage Range: 18-36V
Electrical Interface compliant with IEEE
802.3 (10/100/1000BASE-T)
Optical Interface compliant with IEEE 802.3
(1000BASE-LX10/-SX, 100BASE-FX)
DO-160 – Compliant to Lightening Strike
Category A3J3XX & Voltage Spike Category A
DO-160 – Compliant to Audio Frequency
Conducted Susceptibility input, Category Z
Option to implement Flow Control
Ethernet MDI/MDIX automatic crossover
Magnetics on the electrical signal input side to support
10/100/1000BASE-T operation over 100m Cat 5E
IP67 in mated condition
M38999 Quadrax & pin for Signal, BIT and service port
M38999 Power
M38999 ARINC 801 for Fiber Optic
Flange Mount
Single or Dual Channel Configurations
OPTIONAL FEATURES
Built In Test Console Port accessible via USB2.0
��� Built in Test Console Port accessible via UART-RS422
APPLICATIONS
Harsh Environment such as: Airborne, Tactical,
Railway, Industrial, Oil and Gas and Shipboard
applications