www.glenair.com E-Mail:sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
B
B-54
© 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
MIL-DTL-38999
Series III Type
Glenair ASAP Fiber Optic Cable Sets
Inside-the-Box Receptacle/Pigtail Assembly
with FiberCon® Backshell
D38999 Series III to ST, FC, SC, LC & SMA
Product Features
Jam-Nut and Wall Mount D38999 Series III Type Fiber Optic Receptacle Connectors in
Aluminum, Composite or Stainless Steel
ST, FC, SC, LC and SMA to D38999 Series III Congurations
Grommet Sealing and Micro-Alignment Backshells in Aluminum, Composite and
Stainless Steel
Singlemode and Multimode Fiber Media
Military Standard Dust Caps
MIL-PRF-29504 Approved Termini
Multichannel Capability: From 2 to 37 Channels
Custom Lengths Available
D38999
Series III
Because Sometimes Strain-Relief and Exact Fiber Alignment are a Requirement—
Even Inside the Box
The Glenair FiberCon
®
Backshell Assembly
Glenair can supply receptacle/pigtail assemblies with a FiberCon
®
Backshell that protects ber terminations and
insures exact alignment of the ber optic termini. The grommeted backshell design prevents micro-bending
of the bers while providing optimum strain relief to the overall cable. The unique design is available only from
Glenair and is available as a component part of this ASAP cable assembly. The turnkey assembly includes ber
optic wiring, Glenair Backshell, MIL-DTL-38999 Style Connector, MIL-PRF-29504 Termini, Mil-Spec Dust-Caps and
customer specied marking and labeling.
TerminiRetractionandItsEffectOnMicro-Bending
Retraction During Mating
Radius Should Not Exceed The
Fiber Minimum Bend Radius
FiberCon Backshell Cavity
ASAP ber optic cable sets
www.glenair.com E-Mail:sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
B
B-55
© 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
MIL-DTL-38999
Series III Type
Basic part Number
Terminus Type
P = Pin Terminus
S = Socket Terminus
A Connector Type
06 = D38999/26 Style Plug
08 = D38999/24 Style Jam-Nut Receptacle
H7 = D38999/20 Style Wall Mount Receptacle (Std.)
S7 = D38999/20 Style Wall Mount Receptacle (Slotted)
T7 = D38999/20 Style Wall Mount Receptacle (Tapped)
B Connector Type
0 = ST M83522 Style
1 = ST Connector
2 = FC Connector
3 = SC Connector
4 = SC Duplex
5 = SMA Connector (906 Type)
6 = SMA Connector (905 Type)
7 = LC Connector
8 = LC Duplex
9 = Customer Specied
D38999 Series III Connector Class
F = Aluminum, Electroless Nickel Plating
J = Composite, Olive Drab Cadmium Plating
K = Stainless Steel, Passivated
M = Composite, Electroless Nickel Plating
W = Aluminum, Olive Drab Cadmium Plating
Glenair ASAP Fiber Optic Cable Sets
Inside-the-Box Receptacle/Pigtail Assembly
with FiberCon® Backshell
D38999 Series III to ST, FC, SC, LC & SMA
Please Reference Special Marking,
Labels Or Other Identication Specications on Your Purchase Order.
Unless Indicated, “B”
Connector Identication Will Follow
“A” Connector Pin Designations.
ASAP ber optic cable sets
Protective Covers
L = Less Covers
Omit for with Covers
Length in Inches
6 Inch Minimum
Fiber Size
09 = 9.3/125 Singlemode
50 = 50/125 Multimode
62 = 62.5/125 Multimode
10 = 100/140 Multimode
20 = 200/230 Multimode
Number of Fibers*
02 = 2 Fibers (Shell Size 11)
04 = 4 Fibers (Shell Size 13)
05 = 5 Fibers (Shell Size 15)
08 = 8 Fibers (Shell Size 17)
11 = 11 Fibers (Shell Size 19)
16 = 16 Fibers (Shell Size 21)
21 = 21 Fibers ( Shell Size 23)
29 = 29 Fibers (Shell Size 25)
37 = 37 Fiber (Shell Size 25)
FO1004 P - 08 - 1 W 02 62 48 L
Reference Part Number Development:
L
LENGTH
A
CONNECTOR
B
CONNECTOR
*See Page B-12 for Insert Arrangements
Part Numbering is for Reference Purposes Only. A Unique Glenair Part Number Will Be Assigned to Your Cable Order.